Instruction/ maintenance manual of the product AX-45 Audiovox
Go to page of 8
128-6992 1 of 8 Model AX-45 Installation Manual Keyless Entry System With Two Auxiliary Outputs Installation Instructions This Unit Is Intended For Installation In Vehicles With 12 Volt Negative Ground Electrical Systems Only.
128-6992 2 of 8 This Keyless Entry System is designed to provide a convenient electronic means to gain access to the vehicle by providing RF remote control over the vehicle's power door lock system. The unit also includes outputs to control the vehicle's dome lights, as well as exterior p arking lights.
128-6992 3 of 8 This wire is designed to output a +12VDC positive light flash output, driven by the UNITS's internal relay , to be connected directly to the vehicle's positive parking light circuit. Once the wire is located, confirm that all the vehicle's parking lights will illuminate when +12VDC is connected to it.
128-6992 4 of 8 4 WHITE/BLUE Wire: Immediate, 300mA Duration of Transmit, Channel 4 Output This wire supplies a 300mA switched output whenever Channel 4 of the receiver is accessed.
128-6992 5 of 8 5 terminal 87, to a fused + 12 volt source. In the rare instance that the vehicle door lock/unlock motor legs rest at + 12 volts and switches ground to the door lock/unlock motors, connect the remaining terminal 87, to chassis ground.
128-6992 6 of 8 6 "Programming System Features" shown later in this installation guide to learn the operation of the valet/program/manual override switch. POWER DOOR LOCK HARNESS 3PIN White Plug w/3 Wires; Green, Blue & Blue/Red The connection of the power door lock/unlock wires has already been explained.
128-6992 7 of 8 Second Turn the valet switch on then off 2 chirps = auto locks off 2 Flash pause Press transmitter Lock button to change 1 chirp = auto locks on or Third Turn the valet switch on then .
128-6992 8 of 8 © 2003 Audiovox Electronics Corp., 150 Marcus Blvd., Hauppauge, N.Y ., 1 1788 128-6992.
An important point after buying a device Audiovox AX-45 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Audiovox AX-45 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Audiovox AX-45 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Audiovox AX-45 you will learn all the available features of the product, as well as information on its operation. The information that you get Audiovox AX-45 will certainly help you make a decision on the purchase.
If you already are a holder of Audiovox AX-45, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Audiovox AX-45.
However, one of the most important roles played by the user manual is to help in solving problems with Audiovox AX-45. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Audiovox AX-45 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
