Instruction/ maintenance manual of the product Recontrol M207 Revox
Go to page of 76
Re:control M207 Touch Screen Remote Control User’s Manual.
Preface i Preface About this manual This manual is designed to m ake using the Re:c ontrol M20 7 Remote Control as easy as possible . Informat ion in this doc ument has been c arefully c hecked for accuracy and is s ubject to cha nge without no tice. Copyright © Copyright 2004/ 8 This document is protected by the internati onal copyright law.
.
1 Table of Contents PREF ACE ....................................................................................................... I T ABLE OF CO NTENTS ............................................................................... 1 CHAPTER 1 INTRODUCI NG RE:CONTROL M207 .
Re:control M207 User’s Manual 2 3.7 P RE - CODE ............................................................................................... 34 3.8 L EARNING ........................................................................................
3 Chapter 1 Introducing Re:control M207 Congratulations on your purchasing Re:control M207 Remote Control . The Re:control M207 is a digital Universal Remote Control with smart function design that is easy to configure and use, enabling you to control all your IR equipped electronic devices.
Re:control M207 User’s Manual 4 1.1 Re:control M207 Features This following list identifies Re:control M207 key features. For more information on getting the most, please refer to the following chapters. 1. Control up to 64 devices including VCD/DVD, TV , Satellite, VCR, CD/MD, Receiver/T uner , T ape, etc.
Chapter 1 Introducing Re:control M207 5 1.3 Installing Battery Please refer to the following illustration and instructions for inserting the batteries 1. Rem ove batt ery cover . 2. In sert ba tterie s. Ensure that you insert the batte ries acco rdin g to the ma rking insid e the batt ery cas e.
Re:control M207 User’s Manual 6 1.3.1 Precautions for using battery Please pay attention to the following instructions: 1. Be sure that the positive (+) and negative (-) polarities of each battery match the polarities indicated in the compartment. 2.
Chapter 1 Introducing Re:control M207 7 1.5 Identifying Components Please refer to the following illustrations to identify the components of the Re:control M207. This section provides you an overview of the Re:control M207. For the detailed description on operation, please refer to Chapter 3.
Re:control M207 User’s Manual 8 1.5.2 The rear side of the Re:control M207 Figure 1-2: Rear view 1. IR Port You can point the IR port at the IR receiver of targeted device to control the unit. 2. Reset switch You can reset the Re:control M207 while the Re:control M207 can’t work properly or hang on.
Chapter 1 Introducing Re:control M207 9 1.5.3 Direct Access Buttons (Rubber Buttons) The Direct Access Buttons provide you with easy access to often-used functions such as volume and channel control, f ast forward and fast reverse, play and stop, etc.
Re:control M207 User’s Manual 10 * These buttons function diff erently according to the currently selected device. 1.5.4 LCD Touch Screen The LCD (Liquid Crystal Display) touch screen enables you to configure and operate your Re:control M207 with the touch of a finger .
Chapter 1 Introducing Re:control M207 11 1.5.6 Touch screen keys The touch screen keys enable you to control your devices as you would do with your original remote control. Besides, you can set up macros, program timers and cycle key and configure the LCD screen as many as you want.
Re:control M207 User’s Manual 12 y Device Layout T ap the device key directly to enter the device page. n TV Device name (P .20 ) o Soft key in the device (P .26) p Cycle key (P .39) q Macro key (P .42) y Main Menu Press the Menu button to call out the Main Menu.
Chapter 1 Introducing Re:control M207 13 y Basic Information Layout After pressing the icon, you can get the basic information as follow: n Date information (P .52) o Time information (P .52) p Buzzer information (P .52) q Batteries power indicator ( P .
Re:control M207 User’s Manual 14 y Setup Menu Layout When you are under the setup status you will see the icons as followed: n Help Guide. T ap this icon to get the setup process information. Y ou can press or to read the information pages. After reading the tips, press “ Enter” button to exit.
Chapter 1 Introducing Re:control M207 15 Timer Macro Setup Mode o T ap the icon directly to exchange the functions in T imer Macro. Add / Edit the Timer Macro Re-label the Timer Macro Delete Timer or .
16 Chapter 2 Quick Start In this chapter, you are able to know how to set up the Re:control M207 quickly without through complicate procedure. When turn on the Re:control M207, at first you will see the welcome greeting message shown on the screen. From now on, you formally enter the setup procedure.
Chapter 2 Quick Start 17 2.2 Date / Time setting 1. Press button for 1 second for entering Setup Menu. 2. Scroll the or buttons to choose Setting item and press button for entering “Setting” menu. 3. Scroll the or buttons to select Date item and press button for confirmation.
Re:control M207 User’s Manual 18 2.3 Device setting 1. Turn on the targeted device for the Re:control M207 to setting the device. 2. The Re:control M207 will directly get throw the setup mode when you operate the Re:control M207 at first time. Please tap the target device key in the Main Menu to enter “Setup device” menu.
Chapter 2 Quick Start 19 If you didn’t ge t completely correct remote code s from “Pre-programmed code l ist” item, or you d id wrong steps, please try the othe r ways to re-setup or supplement. a. Use Pre-code fun ction to load curr ent remote co des.
20 Chapter 3 How to Set Your Re:control M207 In this chapter , you can find all the topics about how to setup the Smart Remote. Each topic has its detailed instruction. Y ou can easily customize the Smart Remote by the procedures. 3.1 Add a Device With the function, you are able to create a new device for the Smart Remote.
Chapter 3 How to Set Yo ur Re:control M207 21 4. Please choose two points within the desired block on LCD. A “ v ” symbol will appear where you tapped. After you determine the second point, the key frame will show up on the screen automatically. Tap the frame to confirm the location.
Re:control M207 User’s Manual 22 7. Finally, please decide how you will load the IR remote codes for the device. There are three choices for you: “Pre-code”, “Learning” and “Done”. More detail please refer to the following sections to get further understanding.
Chapter 3 How to Set Yo ur Re:control M207 23 When you are in this p age, you w ill find ou t an icon located on the top-right pos ition. It is “Key Pad Ent ry” function. You can k ey in the number for y our codes directly by searchi ng from the “Pre-p rogrammed code lis t”.
Re:control M207 User’s Manual 24 B. Learning With the function, the Re:control M207 is able to learn IR remote codes directly from your original remote. Y ou can also control your device if you fail to get the right remote codes in the pre-programmed code database.
Chapter 3 How to Set Yo ur Re:control M207 25 1. When you successfully add a ne w device, please decide if you continue to load the codes for the device. Choose the “ Learning ” item, to get the remote codes. 2. The specific key needs to be learned will be shown in black on LCD.
Re:control M207 User’s Manual 26 4. The symbol will show up when the Re:control M207 learns remote codes successfully. However, the symbol will show up when the Re:control M207 fails to learn the remote codes. If the Re:control M207 fails to copy the remote code please repeat step3.
Chapter 3 How to Set Yo ur Re:control M207 27 4. Please choose two points from the blocks on LCD. A “v” sign will appear where you tapped. After you determine the second point, the key frame will show up on the screen automatically. Tap the frame to confirm the location.
Re:control M207 User’s Manual 28 3.3 Add a Text With the function, you are able to add a description for a specific device or soft key . 1. Please press the button for 1 second to enter Setup Menu. And then enter “ Key Layout ” menu. 2. Please choose the “ Add Text ” item and then you will enter the submenu.
Chapter 3 How to Set Yo ur Re:control M207 29 a. The words yo u can add to the d escription will depend on the p oints you cho ose. b. You can add a tex t to not only for a specific dev ice but a soft key. To add a des cription to a s oft key, you just nee d to choose the spe cific device in advance and fo llow the former steps .
Re:control M207 User’s Manual 30 Select letters Tapping the key to select the capital letters, lower case letters or special text for your selection. Select Icons Tapping the key to select more symbols. Delete letters/icon Tapping the key if you want to delete the letters or symbols.
Chapter 3 How to Set Yo ur Re:control M207 31 3.5 Re-size a Device, Key or Text With the function, you are able to re-size a device, soft key or text. Y ou can also use the function to change the locations for them. 1. Please press the button for 1 second to enter Setup Menu.
Re:control M207 User’s Manual 32 frame will show up on the screen aut omatically. Tap the frame to confirm the location. If you want to relocate the points, you can press the button to quit. The way to re-size a soft key is similar to the wa y to add a soft key.
Chapter 3 How to Set Yo ur Re:control M207 33 3.6 Delete a Device, Key or Text With the function, you are able to delete a device, soft key or text. 1. Please press the button for 1 second to enter Setup Menu. And then enter “ Key Layout ” menu. 2.
Re:control M207 User’s Manual 34 8. Please press the button to exit after you finish the delete function. If you have save d the remote co des in the device or the soft key, “Delete” func tion will erase n ot only the ico ns but also the remote codes.
Chapter 3 How to Set Yo ur Re:control M207 35 6. Please select the brand of your device. You just need to se lect the first letter of your brand. For exampl e, if your device belongs to Sony, please select “S” as your brand n . In this page, you will fi nd out an ic on .
Re:control M207 User’s Manual 36 doesn’t included in the Re:control M207 pre-code database. If you can’t use Pre-code to load correct code for your device please try by “Learning Function” a.
Chapter 3 How to Set Yo ur Re:control M207 37 3.8 Learning With the function, you are able to use the Re:control M207 to learn IR remote codes directly from your orig inal remote. Y ou are able to control your devices with the Re:control M207, even if the code for your device is not included in the database.
Re:control M207 User’s Manual 38 1. Please press the button for 1 second to enter Setup Menu. And then enter “ Code Setting ” menu. 2. Please choose the “ Learning ” item and then please press the button to enter the submenu. 3. You will see the help guide for the learning function.
Chapter 3 How to Set Yo ur Re:control M207 39 press the specific key on your orig inal remotes for about 2-3 seconds until the symbol shows up on LCD. 7. The symbol will show up when the Re:control M207 learns remote codes successfully. However, the symbol will show up when the Re:control M207 fails to learn the remote codes.
Re:control M207 User’s Manual 40 3. On pressing the soft key, you will see the direction for the function. After reading the tips, please press the button to go to the next step. 4. Please choose any of keys (exce pt Device key) you will use as C ycle keys.
Chapter 3 How to Set Yo ur Re:control M207 41 3.10 Delete Device/Key codes With the function, you can delete the codes in the keys. 1. Please press the button for 1 second to enter Setup Menu. And then enter “ Code Setting ” menu. 2. Please choose the “ Del.
Re:control M207 User’s Manual 42 3.11 Create a Macro The “ Macro ” function enables you to send a series of commands with just one key . The features for Macro function are as follows: 1. Y ou can save up to 60 commands with in one Macro key . Y ou can use any keys except Device key as your Macro.
Chapter 3 How to Set Yo ur Re:control M207 43 device key , Macr o key and Cycle keys.) for the Macro key . Y ou can save 60 commands at most in a Macro. a. You can press th e icon n to go ba ck the former command you select. b. You can press th e icon o to setup the delay between two comman ds from 0 to 30 s econds.
Re:control M207 User’s Manual 44 An Example to Add a Macro The basic devices in operation: 1. Turn the TV on. 2. Switch the TV to video mode. 3. Turn the DVD on. 4. Create a two-seco nd delay . 5. Instruct the DVD t o play a disc. The commands for the Macro key .
Chapter 3 How to Set Yo ur Re:control M207 45 3.11.2 Timer Macro A. Create a Timer Macro The “ Timer ” function enables you to set up devices to turn on at specified times. It can be used to operate a Macro function automatically at a specific time.
Re:control M207 User’s Manual 46 a. You can press the icon at the top-left corner to go back the former c ommand you select. b. You can pres s the icon to setup the delay between t wo commands , if your device needs ti me to respo nds from 0 to 3 0 seconds.
Chapter 3 How to Set Yo ur Re:control M207 47 a. In setting the Timer , you need to make a ch oice between date and weekday . b. If a T imer Macro has been set, A tinny mark will been shown besi de the Macr o key If the Macro has been set, the symbol will been shown next to the Macro key .
Re:control M207 User’s Manual 48 If you delete th e Timer Macro, you will erase th e Timer along with it at the same t ime. C. Re-label Y our Timer Macro With the function, you can easil y re-label your Tim er Macros. 1. Please choose the “ Re-label ” item and then enter the submenu.
Chapter 3 How to Set Yo ur Re:control M207 49 You can also pres s the” Icon” k ey to add differe nt icons to the Tim er Macro. D. View Y our Timer Macro With the function, you are able to view all the Macro commands and the timer in the Timer Macro you selected.
Re:control M207 User’s Manual 50 3.12 Create Your Favorite Channels Y ou can use Macros to save the channels you like. In this way , you are able to get your favorite channels just by taping Macros. There two main steps you need complete: Add some soft keys as Macros and Set these Macros as your favorite channels.
Chapter 3 How to Set Yo ur Re:control M207 51 3.12.2 Set these Macros as your favorite channels 1. It is the same as the way to set Macro. (Please refer to 3.1 1.1 Macro on page 42 )Please enter “Macro” in “Code Setting”. And then choose one of the soft keys you just created as your Macro key .
Re:control M207 User’s Manual 52 Chapter 4 Menus 4.1 Setting The steps to enter the setting menu for detailed settings are as follows: 1. Press button for 1 second for entering Setup Menu. 2. Scroll the cursor or and choose “ setting ” item, then press button for entering “ Setting ” menu.
Chapter 4 Menus 53 Date 1. Y ou can use the function to setup the date for your remote. 2. Please use or to choose th e y ear , month and date. 3. Please use or to change the numbers. 4. Please press t o save your setting or press to exit without saving the setting.
Re:control M207 User’s Manual 54 LCD Off 1. Y ou can use the function to chan g e the lastin g time for the LCD. 2. Please use or to chan g e to lastin g time for the LCD. 3. LCD can last for 600 seconds at most. (Disable/10s ec ~600sec) 4. Y ou can use the function to chan g e the consumption of electricity .
Chapter 4 Menus 55 Motion 1. The Motion Detector will sense an y movement and turn on the LCD automatically . 2. Y ou can use the function to chan g e the sensitivit y of Motion detector . (Of f/ Slow / Medium / Fast). 3. Please use or to chan g e to sensitivit y of Motion Detector .
Re:control M207 User’s Manual 56 4.2 Key Layout Add Device 1. T o add your devices to the Re:control M207. 2. Y ou can use “Pre-code” or “Learning” to load the codes for the device by the way . 3. (Please refer to Chapter 3.1 Add a Device on page 20.
Chapter 4 Menus 57 4.3 Code Setting Pre-code T o load the pre-programmed codes for your devices. (Please refer to 3.7 Pre-code on page 34.) Learning T o use the function to learn the IR codes from your remotes. (Please refer to 3.8 Learning on page37.
Re:control M207 User’s Manual 58 4.4 Timer Macro Add / Edit T o add or edit your T imer Macros in your Re:control M207. Y ou can setup the Timer fo r the Macro at the same time. There are 32 sets of T imer Macros you can use. (Please refer to 3.1 1.
Chapter 4 Menus 59 4.5 Duplicate Duplicate Y ou can connect two Re:control M207s with T ransmit W ire . ( Appendix B P . 71) And then you duplicate the settings in one remote and transfer then to the other one. With the function, you are able to transfer your settings to the o ther Re:control M207 with T ransmit Wire.
Re:control M207 User’s Manual 60 6. A message will appear to show the process of the duplication. 7. If the duplication is completed successfully , a message will show up to tell you the completion. If the duplication isn’t successfully please repeat from the step 1 again.
Chapter 4 Menus 61 4.6 Calibrate When you feel the Re:control M207’s touch panel is not so sensitive, you can use the function to adjust the touch panel in your Re:control M207 In this way . Besides, the Re:control M207 will also lead you to complete the function when you reset your remote.
Re:control M207 User’s Manual 62 Chapter 5 Install USB Cable and Software 5.1 Install Re:connect USB cable The Re:connect USB cable enables the Re:control M207 to conne ct with a PC. 5.1.1 Install the Driver 1. Find the SLC-2080 USB_driver from the CD enclosed with the package or download the driver from http://www.
Chapter 5 Install USB Ca ble and Software 63 2. The program is starting to install the driver. After few seconds, the window shows as below. Please click “Finish” to complete the setup processes.
Re:control M207 User’s Manual 64 5.2 Install Upgrade Tools Upgrade Tools enables you to upgrade your firmware and pre-programmed codes through the net. 1. Find the program from the CD enclosed with the package or download the program from http://www.
Chapter 5 Install USB Ca ble and Software 65 5. If everything is Ok, please click “Install” to setup the program. 6. At this time, you have successfully installed Upgrade Tools.
Re:control M207 User’s Manual 66 5.3 Upgrade VMCU Firmware and VMCF Pre-programmed Codes With the Re:connect USB cable and Upgrade Tools, you ca n easily upgrade your Re:control M207 through t he internet. There are two types of file you can upgrade: VMCU Firmware and VMCF Pre-programmed Codes.
Chapter 5 Install USB Ca ble and Software 67 3. Please select “Data Source” where you will load the files. From Internet: You will download the latest files from our database. From File: If you want to load the previous file, please select the item.
Re:control M207 User’s Manual 68 6. After selecting the “Update type”, just click “Upgrade” button to start the updating process..
69 Appendix A Features 64 Devices in One: 64 in 1 remote control. No more running out of device buttons. Customization: Users can customize every the size, text, or icon for the button as your will. Pre-Programmed Code: Users can access to the specific codes for their devices from pre-programmed codes.
Re:control M207 User’s Manual 70 Specifications Model Re:control M207 Battery Alkaline batteries 3 x AAA or Ni-MH rechargeable batteries Dimensions 210 (L) x 68 (W) x 24 (H) m m Weight 170g (without.
71 Appendix B Optional Accessories Re:connect USB cable USB Cable T ransmit W ire The Re:connect USB cable enables transmission of system setup between a PC and the Re:control M207. With T ransmit Wire the Re:control M207 also can duplicate the user setup data for one to another .
72 Appendix C Troubleshooting Tables Problem Solution LCD does not show anything when you touch it. • Batteries may be dead. • Replace the batteries with th ree new AAA Alkaline batteries. • Check the batteries are properly installed. The Re:control M207 doesn’t operate a device.
Troubleshooting Tables 73 Problem Solution your AV devices: - Repeat the learni ng procedure again. - If you still can’t solve the problem, contact us for help. - Original remote migh t not be compatible with learning procedure. Macro does not work.
An important point after buying a device Revox Recontrol M207 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Revox Recontrol M207 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Revox Recontrol M207 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Revox Recontrol M207 you will learn all the available features of the product, as well as information on its operation. The information that you get Revox Recontrol M207 will certainly help you make a decision on the purchase.
If you already are a holder of Revox Recontrol M207, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Revox Recontrol M207.
However, one of the most important roles played by the user manual is to help in solving problems with Revox Recontrol M207. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Revox Recontrol M207 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
