Instruction/ maintenance manual of the product 8000 MXP Revolabs
Go to page of 5
Revolabs Fusion™ Wireless Micropho ne System- Tandberg 6000 / 8000 MXP Setup Guide N OTES AND C AUTIONS : This setup guide will guide yo u th rough the steps neede d to properly connect a Revolabs Fusion System to a Tandbe rg 6000 / 8000 MXP video codec.
Connecting the Cables C ONNECTING A REVOLABS FUSIO N TO T ANDBERG 6000 / 8000 MXP VIDEO CODEC 1. Connect a Male RCA-RCA audi o cable between the “Conf. In” port on the Fusion and the “VCR 1” port on the 6000 / 8000 MXP. 2. Connect a Male XLR audio ca ble between the “Mic Conf.
Configuring the 6000 / 8000 MXP Video Codec C ONFIGURING THE AU DIO MENUS OF THE 6000 / 8000 MXP VIDEO CODEC 1. Go to AUDIO SETTINGS 2. Select INPUTS 3. Confirm that MIC 1 is ON 4. Adjust the audio Input Type Leve l if necessary (recommend +0dB) 5. Speak into the Revolabs microphone s that are connected to MIC 1.
6. Return to previous menu and select OUTPUTS 7. Confirm that Out1 is ON 8. Adjust the audio Output Type Le vel if necessary (recommend +0dB) 9. Return to previous menu and select ECHO CONTROL 10. Enable MIC 1 Echo Canceller (ON) 11. Return to previous menu and select AUDIO LEVELING (AGC) 12.
NOTE: You must use your Fusion remote control to control the room volume for both the audio and video conference calls. Adjusting the volume in the video codec will cause echo.
An important point after buying a device Revolabs 8000 MXP (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Revolabs 8000 MXP yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Revolabs 8000 MXP - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Revolabs 8000 MXP you will learn all the available features of the product, as well as information on its operation. The information that you get Revolabs 8000 MXP will certainly help you make a decision on the purchase.
If you already are a holder of Revolabs 8000 MXP, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Revolabs 8000 MXP.
However, one of the most important roles played by the user manual is to help in solving problems with Revolabs 8000 MXP. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Revolabs 8000 MXP along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
