Instruction/ maintenance manual of the product Passover ResMed
Go to page of 2
W ARNINGS AND C AUTIONS W ar nings: • T he humidifier is for single-person use only . • Do not allow water from the humidifier to spill through the air tubing into the flow generator as this could result in electrical shock hazard and may damage the unit.
5 Check that both the short and long air tubing are securely connected to the humidifier and the flow generator. The humidifier is now ready to use . C ONNECTING THE F LOW G ENERA TOR 1 P osition your flow generator on top of the humidifier . The front of the flow genera tor should sit betw een the inlet and outlet of the humidifier .
An important point after buying a device ResMed Passover (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ResMed Passover yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ResMed Passover - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ResMed Passover you will learn all the available features of the product, as well as information on its operation. The information that you get ResMed Passover will certainly help you make a decision on the purchase.
If you already are a holder of ResMed Passover, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ResMed Passover.
However, one of the most important roles played by the user manual is to help in solving problems with ResMed Passover. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ResMed Passover along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
