Instruction/ maintenance manual of the product HumidAire 2i ResMed
Go to page of 8
Clinical Use Only 1 HumidA ire 2i ™ HEA TED HUMIDIFIER Disinfection Guide English.
Clinical Use Only 2 ResMed HumidAire 2i – Disinfection Guide This Disinfection Guide is intended for multipatient use of the HumidA ire 2i in a slee p lab, clinic or hospital. If you use the water chamber as a single user in the home, refer to the User Guide fo r cleaning instructions.
Clinical Use Only 3 ResMed Validated Procedures T able 1: Option 1 (A utomatic Cleanin g and High-Level Ther mal Disinf ection) Option 1 (A utomatic Cleaning and High-Lev el Therm al Disinfection) Disassembly Disassemble the humidifier water c hamber according to the “Disassembling and Reassembling” instructio ns on page 5.
Clinical Use Only 4 T able 2: Option 2 (Manual Cleaning an d High-Lev el Chemical Disinfection) Option 2 (Manual Cleaning and Hi gh-Lev el Chemical Disinfection) Disassembly Disassemble the humidifier water c hamber according to the “Disassembling and Reassembling” instructio ns on page 5.
Clinical Use Only 5 Disassembling and Reassembling the HumidAire 2i WARNING Beware of electrocution. Do not imme rse the device or power cord in wa te r.
Clinical Use Only 6 6 1 . Push do wn on the tub plate from inside the c hamber to remove it from the c hamber . 2. Remove the O-ring from the tub plate. 3. Turn the water chamber base upside down. Firmly pull the latch up and away from the chambe r until separated from the base.
Clinical Use Only 7 2. Take the assembled catches and fit them to the water chamber base. 3. Turn the water chamber base upside down . Insert the latch’s feet into the locki ng tabs. Push firmly and click into place. 4. Refit the O-ring in the channel of the tub plate.
Clinical Use Only 8 7. Fit the seal onto the rim of th e water chamber base. Press along the edge to ensure that the seal is fitted prop erly. 8. Fit the lid onto the water chamber base. Press the lid and base firmly togethe r to close. 9. Lock the catches on the side of the water chamber.
An important point after buying a device ResMed HumidAire 2i (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ResMed HumidAire 2i yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ResMed HumidAire 2i - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ResMed HumidAire 2i you will learn all the available features of the product, as well as information on its operation. The information that you get ResMed HumidAire 2i will certainly help you make a decision on the purchase.
If you already are a holder of ResMed HumidAire 2i, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ResMed HumidAire 2i.
However, one of the most important roles played by the user manual is to help in solving problems with ResMed HumidAire 2i. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ResMed HumidAire 2i along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
