Instruction/ maintenance manual of the product APS-92BT-CL Audiovox
Go to page of 6
Owner's Manual The transmitters included in the security system kit are pre-programmed at the factory, with button # 1 assigned to channel one only. The suggested program arrangement is listed below. To program channel 2 and 3, please follow the programming instructions listed on pages two and three of this manual.
These factory programmed settings can be prioritized based on an individual's frequency of use, (i.e. pressing both buttons simultaneously to activate channel 1, arm/disarm etc.
6. Move the valet/bypass switch on, then off again. 7. The dash mounted L. E. D. will flash 2 times, and the siren will "chirp" one time, indicating that the system is ready to accept programming for channel 2, or the pulsed ground output for remote trunk release, remote car starter, etc.
The transmitter incorporates a small red L.E.D. built into the case. This L.E.D. can be used to indicate battery condition. You will notice a decrease in transmitter range as the battery condition deteriorates. To replace the battery... 1. Remove the transmitter cover by removing the small screw from the back of the transmitter case.
ORDERING ADDITIONAL or REPLACEMENT TRANSMITTERS: Order Form for Additional 2 Button Transmitters Model: APS-92BT-CL IMPORTANT: Read instructions below and legibly print all required infor mation. 1. Fill in the following information NAME ADDRESS CITY STATE ZIP CODE DATE PURCHASED WHERE PURCHASED (N.
Audiovox Corporation 150 Marcus Blvd. Hauppauge, N.Y. 11788 Form No. 128-4855.
An important point after buying a device Audiovox APS-92BT-CL (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Audiovox APS-92BT-CL yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Audiovox APS-92BT-CL - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Audiovox APS-92BT-CL you will learn all the available features of the product, as well as information on its operation. The information that you get Audiovox APS-92BT-CL will certainly help you make a decision on the purchase.
If you already are a holder of Audiovox APS-92BT-CL, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Audiovox APS-92BT-CL.
However, one of the most important roles played by the user manual is to help in solving problems with Audiovox APS-92BT-CL. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Audiovox APS-92BT-CL along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
