Instruction/ maintenance manual of the product APS-786 Audiovox
Go to page of 10
128-6530 1 of 10 Model APS-786 Owner's Manual 4 Button Remote Start Security System With Plug-In Shock Sensor & Starter Disable FEA TURES: M 2 Four Button Programmable RF Transmitters M Four .
128-6530 2 of 10 Page 2 Y our Remote Start Alarm System has many features and available options some of which are selected at time of installation. For your reference, the list on page 9 of this manual shows what features and options have been installed.
128-6530 3 of 10 1. Turn the engine off, exit the vehicle, and close all doors, hood and trunk. The dash mounted LED will begin to flash rapidly indicating that the 30 second passive arming timer has begun. If the LED does not begin to flash rapidly , then you have left a door , hood, or trunk ajar .
128-6530 4 of 10 Page 4 second time will cause all doors to unlock. If your transmitter has a sperate lock unlock buttons, pressing the unlock button anytime after the first unlock command will cause all the vehicle doors to unlock. SILENT DISARMING 1.
128-6530 5 of 10 Page 5 1 . Enter the vehicle, and turn the ignition key to the on position. 2 . Press and hold the valet pushbutton switch until the dash mounted LED turns on solid. The system will remain in the valet mode. 3 . T o return to normal operation, press and release the pushbutton switch any time the ignition is on.
128-6530 6 of 10 Page 6 Custom Code Programming Example: T o Change the code from the factory pre-assigned code of 1 1 to “52” you would do the following: 1 . Disarm the system by use of the transmitter , or by use of the emergency override sequence.
128-6530 7 of 10 Page 7 NOTE: If the vehicle battery is disconnected then reconnected, the unit will return to the default setting of chirps on. Repeat the above procedure to eliminate the arm/disarm chirps.
128-6530 8 of 10 When you arrive at your vehicle, disarm the alarm system by pressing and releasing the Disarm button of your keychain transmitter . Enter the vehicle and turn the ignition key to the on position. CAUTION ! Do not turn the key to the start position.
128-6530 9 of 10 G Remote Window Close G Remote Garage Door Interface T o operate the accessory associated with channel 3, press and hold the trunk/key button(s) of your keychain transmitter for four seconds.
128-6530 10 of 10 ALARM DASH LED INDICA TORS RAPID FLASHING = P ASSIVE ARMING SLOW FLASHING = ARMED OFF = DISARMED ON SOLID = V ALET MODE 3 FLASH... P AUSE = I NTRUSION ZONE 3 2 FLASH.
An important point after buying a device Audiovox APS-786 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Audiovox APS-786 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Audiovox APS-786 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Audiovox APS-786 you will learn all the available features of the product, as well as information on its operation. The information that you get Audiovox APS-786 will certainly help you make a decision on the purchase.
If you already are a holder of Audiovox APS-786, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Audiovox APS-786.
However, one of the most important roles played by the user manual is to help in solving problems with Audiovox APS-786. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Audiovox APS-786 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
