Instruction/ maintenance manual of the product APS-45 Audiovox
Go to page of 8
Model APS-45 Installation Manual Keyless Entry System With Two Auxiliary Outputs Installation Instructions This Unit Is Intended For Installation In Vehicles With 12 Volt Negative Ground Electrical Systems Only.
The APS-45 Keyless Entry System is designed to provide a convenient electronic means to gain access to the vehicle by providing RF remote control over the vehicle's power door lock system. The unit also includes outputs to control the vehicle's dome lights, as well as exterior parking lights.
3 light systems in these vehicles, you must use a separate SPDT relays to connect to each side in order to keep them isolated. Attach the WHITE wire of the system to this point.
4 transmitter buttons simultaneously will access Channel 3 and will remain active for as long as the transmitter button(s) is held. This is a low current output and must be connected to a relay to supply power to the device you intend to control. Connect Green/Black Trace wire to terminal #86 of a VF45F11 P&B relay or equivalent.
5 wire that provides a low current positive signal from the factory door lock switch to the factory door lock control relay. 3 Wire Positive Switched 2 Step Door Locks The green wire provides a positive pulse during locking, or the pulsed + 12 volt lock output.
6 If you desire to have the transmitters operate differently from this factory configuration, please refer to the separate Trans- mitter Programming Guide that came with the APS-45 system. PROGRAMMING FEATURES: There are seven (7) Programmable Features on the APS-45 system.
7 FEA T URE A C TIO N TO P E R F O R M RESPONSE FROM SYST EM LED FLA SH PA T T ERN To Tur n t he I gni t i o n Swi t c h ON LED Tur ns OFF Ent er Toggl e t he V al et / Pr ogr am/ M anu al Over r i de.
© 1999 Audiovox Corp. 128-5621 APS-45 OPTIONAL ( + ) ( - ) ( + ) ( - ) OPTIONAL.
An important point after buying a device Audiovox APS-45 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Audiovox APS-45 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Audiovox APS-45 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Audiovox APS-45 you will learn all the available features of the product, as well as information on its operation. The information that you get Audiovox APS-45 will certainly help you make a decision on the purchase.
If you already are a holder of Audiovox APS-45, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Audiovox APS-45.
However, one of the most important roles played by the user manual is to help in solving problems with Audiovox APS-45. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Audiovox APS-45 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
