Instruction/ maintenance manual of the product 310 Regalo
Go to page of 13
Home Accents Extra Wide Walk Thru Gate MODEL NO: 0310 Owner’s Manual READ ALL INSTRUCTIONS BEFORE ASSEMBLY AND USE OF GATE. KEEP INSTRUCTIONS FOR FUTURE USE. Regalo International, LLC. 3200 Corporate Center Drive, Suite 100 Burnsville, MN 55306-9803, USA Toll Free: 866-272-5274 Made in China .
Contact Regalo for questions and replacement parts. For questions about the use of your gate, call our customer care line 866-272-5274 Regalo International, LLC. 3200 Corporate Center Drive, Suite 100 Burnsville, MN 55306-9803, USA Made in China Intended for young children aged 6 months through 24 months.
Check to mak e sure y ou hav e all of the par ts shown: A. Gate Frame B. 4 W all Cups C. 4 Screws ( requires a Phillips/crosshead screwdriver ) D. 4 Threaded Spindle Rods C.
NO TE: When installing any gate at its maximum width use Wall Mounting Cups to ensure stability and safety. 2 Extensions List 0310 29--44 inches Item NO .
Assem blin g and In stalling Y our Gate Step 1. Step 2. **Note: IMPORT ANT!! Y ou will notice a slight gap between the gat e door latch and the frame. THIS IS NOT A DEFECT . Y our ga te is a pressur e mounted gate and this gap will disappear once you tight en your gate in its opening .
Step 3. 4 Diagram C1 Diagram C2 Position the gate so that it is level and centered within your doorway or opening. Rotate the adjustment wheels on the threaded spindle rods in the opposite direction at in Step 1, expanding the gap between the rubber foot and the adjustment wheel.
Step 4 . 5 NO TE: There should be equal spacing among each of the 4 Threaded Spindle Rods. Make the appropriate adjustment to ensure you have installed your gate safely.
P ositioning and Attaching the W all C ups Y our gate is a pr essure mount ed gate. Theref ore , it is not necessary to use the screw attached Wall Cups in y our door opening if you choose not to . However , IF YOU ARE USING THE GA TE A T THE T OP OF ST AIRS Y OU MUST USE THE W ALL CUPS.
7 Step 3. With the gate fully removed, you can now use the circles you marked during Step 1 as guides for screwing in your 4 Wall Cups. Center each of the Wall Cups within the guide circles and use the provided self-tapping screws to fasten them in place via the hole through the center of each Wall Cup.
Opera ting the Door Latch 8 HINT : If your Easy Slide Latch is not properly engaging with the receiving component, ensure that your gate is level, mounted properly, and that you have not over-tightened the threaded Spindle Rods.
A dding a Gate Extension Removing Y our Gate Fro m T he W all Care And Maintenanc e Step 1. Assemble the gat e per the gate instructions. Step 2. Choose the side of the gate t o be extended and remove the t op and bottom Threaded Spindle Rods. Step 3.
Replacemen t P ar ts A vailable 10 In the event of any damage or breakage, the following replacement parts are available for order by contacting Regalo Customer Service.
01/06/2014_EV Regalo International, LLC. 3200 Corporate Center Drive, Suite 100 Burnsville, MN 55306-9803, USA Toll Free: 866-272-5274 Made in China.
An important point after buying a device Regalo 310 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Regalo 310 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Regalo 310 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Regalo 310 you will learn all the available features of the product, as well as information on its operation. The information that you get Regalo 310 will certainly help you make a decision on the purchase.
If you already are a holder of Regalo 310, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Regalo 310.
However, one of the most important roles played by the user manual is to help in solving problems with Regalo 310. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Regalo 310 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
