Instruction/ maintenance manual of the product 1350 Regalo
Go to page of 12
Owner’s Manual 4 in 1 Play Yard MODEL NO: 1350 READ ALL INSTRUCTIONS BEFORE ASSEMBLY AND USE OF GATE. KEEP INSTRUCTIONS FOR FUTURE USE. Regalo International, LLC. 3200 Corporate Center Drive, Suite 100 Burnsville, MN 55306-9803, USA Toll Free: 866-272-5274 Made in China .
.
The four Wall Mounting Brackets must be used in securing the gate to the wall. These brackets prevent the gate from dislodging from its opening and becoming unstable. The maximum width opening for the gate is 194.5 inches. Assembly and Installation Instructions Contact Regalo for questions and replacement parts.
2 Check to mak e sure y ou hav e all of the par ts shown: A. Folded Gate Frame and attached Wall Mounting Assembly (8 panels) B. 8 Wall Mounting Screws A.
Installation Option A : T o install the Pla y Y ar d as a barrier between two w alls. 3 Begin by unfolding the gate frame. To do this, simply loosen the Locking Knobs at each pivoting joint by turning the knob counter clockwise as shown in Diagram A. Loosen the knobs enough to allow the gate to swing open freely without fully removing the knobs.
4 Use a Phillips/crosshead screwdriver to fix the Wall Mounting Bracket to the Wall as shown in Diagram C Step 3. Repeat steps 2 & 3 on the other end of the gate. Arrange the panels into your desired configuration, then tighten each of the Locking Knobs.
5 Installation Option B : T o set it up as a Pla y Y ar d enclosure . Begin by unfolding the gate frame. To do this, simply loosen the Locking Knobs at each pivoting joint by turning the knob counter clockwise as shown in Diagram A. Loosen the knobs enough to allow the gate to swing open freely without fully removing the knobs.
Position the Play Yard into your desired configuration (Example: Octagon, Square, etc.) Then, join the free ends of the the Play Yard together at the plastic joints as shown in Diagram E1 and E2. Step 3. Insert one of the previously removed Metal Pivot Bars through the opening created by joining the upper plastic joints.
Finally, tighten each of the Locking Knobs by turning them clockwise, fixing the Play Yard into the configuration you have decided upon. To position the Play Yard into a new configuration or shape, simply loosen each of the Locking Knobs, adjust and re-tighten.
T o fold y our Play Y ar d Step 1 : To fold your Play Yard begin by loosening all of the locking knobs so the Play Yard can move freely and becomes flexible at the joints. Step 2 : Remove one of the locking knobs from the Play Yard and remove one vertical tube.
cemen t P ar ts A v ailable Repla In the event of any damage or breakage, the following replacement parts are available for order by contacting Regalo Customer Service.
01/09/2013_EV Regalo International, LLC. 3200 Corporate Center Drive, Suite 100 Burnsville, MN 55306-9803, USA Toll Free: 866-272-5274 Made in China.
An important point after buying a device Regalo 1350 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Regalo 1350 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Regalo 1350 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Regalo 1350 you will learn all the available features of the product, as well as information on its operation. The information that you get Regalo 1350 will certainly help you make a decision on the purchase.
If you already are a holder of Regalo 1350, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Regalo 1350.
However, one of the most important roles played by the user manual is to help in solving problems with Regalo 1350. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Regalo 1350 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
