Instruction/ maintenance manual of the product WHR120RS RCA
Go to page of 8
Thank you for choosing RCA Wireless Headphones. Y ou have selected a fine product designed to provide years of performance. Before attempting to use your Wireless Headphones, please remove all part s from the box and read the installation and use instructions carefully .
2 2 This infrared (IR) wireless headphone system transmits stereo sound signals throughout the room allowing you to enjoy music or sound privately from any audio or video device. With a range of up to 25 feet, you may have freedom from wires while listening to your TV , video or audio CD in the same room.
3 ON THE IR STEREO TRANSMITTER (see figure 1 below) 1. IR transmitting LEDs,to transmit the audio signal to the IR headphone 2. Power on/off switch 3. DC input connector , to power the IR transmitter 4. Recharge cable, to charge the batteries of IR headphone 5.
4 2. Insert the connector of the AC/DC adapter into the 12V DC input connector on the rear of the IR transmitter (see figure 3 above). 3. Plug the adapter into a 120 V olt wall outlet. 4. Remove the soft earpads from the earcups by gently lifting them up.
5 5 1. Switch on the (IR) transmitter and position it in a location at approximately the same height as that of the headphone when it will be in use. This system operates using IR light signals that are invisible to the human eye.
6 6 1. Switch off the power of the headphone before charging. 2. Note: Before using the IR headphone for the first time, please ensure that the batteries are fully charged (for 16 hours). This will guarantee a longer operating life for the batteries. 3.
7 7 Figure 5 35 ° 35 ° 25 FT . IR TRANSMITTER OPTIMUM LISTENING RANGE HEADPHONES RANGE OF TRANSMITTER WHR120RS_IB 7/3/02 8:49 AM Page 7.
8 8 Thomson multimedia Inc. warrants that for 1 year from date of pur- chase, it will replace this product if found to be defective in materi- als or workmanship. Return it postage prepaid to the Product Exchange Center address for prompt, no charge replacement with a current equivalent.
An important point after buying a device RCA WHR120RS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought RCA WHR120RS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data RCA WHR120RS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, RCA WHR120RS you will learn all the available features of the product, as well as information on its operation. The information that you get RCA WHR120RS will certainly help you make a decision on the purchase.
If you already are a holder of RCA WHR120RS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime RCA WHR120RS.
However, one of the most important roles played by the user manual is to help in solving problems with RCA WHR120RS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device RCA WHR120RS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
