Instruction/ maintenance manual of the product L26HD35D RCA
Go to page of 48
A TTENTION If you purchase a univ ersal remote control from y our local retailer , please contact the remote manuf acturer for the required progr amming code. AIR/CABLE MODE SELEC TION When shipped from the factory , the Signal T ype option is set to the “Cable” (Cable T elevision) mode.
2 CA UTION: THIS DIGIT AL VIDE O PLA YER EMPLO YS A LA SER SY S TEM. T O ENSURE PROPER USE OF THIS PRODUCT , PLEASE READ THIS OWNER'S MANU AL CAREFULL Y AND RET AIN FOR FUTURE REFERENCE. SHOULD THE UNIT REQUIRE MAINTENANCE, CONT ACT AN A UTHORIZED SER VICE LOCA TION-SEE SER VICE PROCEDURE.
3 15) Apparatus should not be e xposed to dripping or splashing, and objects filled with liquids, such as vases , should not be placed on the apparatus. 16) An outside antenna system should not be located in the vicinity of o verhead po wer lines or other electric light or power cir cuits, or where it can f all into such power lines or cir cuits.
4 IMPOR T ANT SAFETY INS TRUC TIONS (continued) 23) When you connect the product to other equipment, turn off the po wer and unplug all of the equipment from the wall outlet.
5 The unit emits heat when in operation. Do not place an y covers or blank ets on the unit, this may cause ov erheating. Do not block ventilation holes, or set up near r adiators. Do not place in direct sunshine . When placing on a shelf leav e 10 cm (4 inches) free space around the entire unit.
6 * is a trademark of D VD Format/L ogo Licensing Corporation. * Manufactured under license fr om Dolby Laboratories . Dolby and the double-D symbol ar e trademarks of Dolby Laboratories . * Manufactured under license under U .S . P atent #: 5,451,942 & other U.
7 Contents Bef ore using your unit IMPORT ANT SAFETY INSTR UCTIONS ........... 3 SAFETY PREC A UTIONS ................................. 5 IMPORT ANT NOTICE ....................................... 5 Featur es ...........................................
8 Play able discs Disc type and logo mark content D VD Video Audio + Video (moving pictures) CD-D A Audio The follo wing discs are also av ailable. D VD-R/RW discs of D VD video format. CD-R/RW discs of MP3/WMA/JPE G. • • Disc CA UTION: Only the left types of discs can be pla yed on this unit.
9 L ocation of controls Fr ont T o displa y the menu screen. Press MENU button to display the menu scr een. CHANNEL / buttons, V OLUME +/– buttons and INPUT/ENTER button can be used to select the desired setting during the menu screen operations .
10 L ocation of controls (continued) Rear side AC INPUT jack HDMI 1/D VI IN jack HDMI 2 IN jack PC/D VI AUDIO IN jack A UDIO ( L/R ) jacks (for COMPONENT IN and LINE 2 VIDEO IN) LINE 1 IN jacks (VIDEO.
11 Remote contr ol POWER P ower On/Off DISPLA Y/– Call TV information Call D VD information Input “–” f or digital channels TV/D VD Switch between TV/A V and D VD (EJECT) Eject a disc 0-9 Dire.
12 Appro ximately 15 feet Inserting Batteries 1 Open the battery compar tment cov er in the direction of the arrow . 2 Install two “ AAA ” batteries , paying attention to the polarity diagram in the battery compartment. 3 Replace the compartment cov er .
13 Antenna connections If you are using an indoor or outdoor antenna, f ollow the instructions below that corr espond to your antenna system. If you are using a Cable TV service, see page 14 f or Cable TV connections.
14 Cable TV connections For basic C able TV service not requiring a Converter/ Descrambler bo x, connect the 75 ohm Coaxial Cable directly to the Antenna Jack on the back of the TV .
15 Starting setup The Starting Setup menu appears the first time you turn on the TV , and assists you to select the menu language, specify the Air/Cable setting, and program y our channels automatically .
16 CABLE CHAR T The chart below is typical of many cable s ystem channel allocations. NO TE: It may tak e a fe w seconds for a digital channel picture to appear on screen after being selected. Automatic search 1 Press SETUP/TV MENU in the TV mode. The TV menu screen will appear .
17 TV operation 1 T o turn on the TV , press POWER . (POWER indicator on the front of the unit changes green. It ma y take appro x. 10 seconds for a picture to appear on scr een.) 2 Adjust the volume le vel b y pressing V OL + or – . The volume le vel will be indicated on the screen by blue bars .
18 MUTE Press MUTE to switch off the sound. The TV’s sound will be silenced and “Mute” will appear on the screen. The sound can be switched back on b y pressing this button again or the V OL + or – . SLEEP T o set the TV to turn off after a preset amount of time , press SLEEP on the remote control.
19 T o register a passwor d 1 Press SETUP/TV MENU in the TV mode. The TV menu screen will appear . 2 Press ▲ or ▼ to select “Lock”, then press ▶ or ENTER . 3 Select and enter your pass word (4 digits) using Number buttons (0-9) , then press ENTER .
20 T o download the additional V -Chip rating system (when av ailable) 1 Press SETUP/TV MENU while on a digital channel. 2 Press ▲ or ▼ to select “Lock”, then press ▶ or ENTER . 3 Use Number buttons (0-9) to enter your pass word, then press ENTER .
21 This is normal with Closed Captioning, especially with live progr ams. This is because during liv e programs , captions are also entered live . These transmissions do not allow time f or editing. When Captions are being displa yed, on-screen display s, such as volume and mute ma y be seen but may interfer e with Closed Captions.
22 Brightness:25 5 After adjusting, press ENTER to return to the Picture Setting menu. Then continue to adjust the other items. ◀▶ Brightness decrease brightness increase brightness Contrast decre.
23 Cinema Wide3 (for letter bo x programs with subtitles) T o fill the width of the screen, it is e xtended horizontally . Ho wev er ; it is only slightly extended at the top and the bottom.
24 Sound control adjustment 1 Press SETUP/TV MENU in the TV mode. The TV menu screen will appear . 2 Press ▲ or ▼ to select “ Audio” , then press ▶ or ENTER . 3 Press ▲ or ▼ to select the item you w ant to adjust. T reble Balance MTS Stereo Surround Off Audio Language No Info.
25 Selecting the HDMI audio input source When you use PC/D VI A UDIO IN jack with HDMI or D VI device, y ou must select HDMI audio input source from “HDMI” or “D VI”. 1 Press SETUP/TV MENU in the TV mode. The TV menu screen will appear . 2 Press ▲ or ▼ to select “ Audio”, then press ▶ or ENTER .
26 Resetting y our settings The Reset function returns y our settings to the factory settings. 1 Press SETUP/TV MENU in the TV mode. The TV menu screen will appear . 2 Press ▲ or ▼ to select “Setup” , then press ▶ or ENTER . 3 Press ▲ or ▼ to select “Reset”.
27 3 On the screen, “ ” changes to “Reading” and then playback will commence . A menu screen ma y appear on the TV screen, if the disc has a menu feature . In this case, press ▲ , ▼ , ◀ , ▶ or ENTER to operate a menu feature . • Reading 4 Press STOP to end playback.
28 Music recorded b y “ Joliet Recording Specification” can be play ed back. The music files recorded b y “Hierar chical File System” (HFS) cannot be pla yed. The unit can play back baseline and pr ogressive JPEG files. Limitations on display The maximum number for displa y is 15 characters.
29 Select Files The file type to make it displa y in the file brow ser can be chosen. 1 Press ◀ / ▶ to select “Select Files” at right column in the file brow ser . Press ENTER , then press ▲ / ▼ to select file type from the list (Music or Picture).
30 Repeat pla yback ( CD ) 1 In the file brow ser , press ▲ / ▼ / ◀ / ▶ to select “Repeat”. 2 Press ENTER repeatedly to select “T rack” or “ All”. Folder-1 Folder-2 MP3-1 MP3-2 MP3-3 WMA-1 WMA-2 WMA-3 JPEG Preview Select Files Repeat :Track Mode :Off 3 Press PLA Y .
31 A-B Repeat Pla yback: A-B repeat pla yback allows y ou to repeat material between two selected points . 1 Press REPEA T A-B during playback. The start point is selected. A 2 Press REPEA T A-B again. The end point is selected. Pla yback starts at the point that you selected.
32 Subtitles T urning the subtitles on and off When playing back a disc r ecorded with subtitles, you can turn the subtitles on or off. Press SUBTITLE during pla yback until “Off ” appears. Off Changing the subtitle language Y ou can select the language when playing back a disc recorded with multilingual subtitles .
33 English, Fr ancais, Espanol : The selected language will be heard or seen. Other: Other language can be selected (see the “Language code list” on page 36). Original (Audio): The unit will select the first priority language of each disc. Off (Subtitle): Subtitles do not appear .
34 Auto: Select this position normally . The D VD play er automatically detects source content, film or video , of playback source . Film: Suitable for pla yback of film content pictures. Video: Suitable for pla yback of video content pictures. 4 Press SETUP/TV MENU to remo ve the menu screen.
35 Pas swo rd 1 2 3 4 5 6 7 8 Off Parental Le vel Off : The parental control setting does not function. Le vel 8 : Virtually all DVD softwar e can be play ed back. Le vel 1 : DVD softw are for adults cannot be play ed back. Select from le vel 1 to lev el 8.
36 Language code list Enter the appropriate code number for the initial settings “Menu”, “Subtitle” and/or “ Audio” (see page 32). Language Name Code Language Name Code Language Name Code .
37 YP b P r Y Pb Pr T o connect the LCD TV/D VD to a V CR with an S- Video cord If you connect a V CR with a S- Video cable to the S- VIDEO IN jack on the rear side of the unit, y ou must also connect the audio cables to the A UDIO IN jacks on the rear side of the unit.
38 T o connect a HDMI or a DVI de vice to the unit The HDMI 1 input receives digital audio and uncompr essed video from a HDMI device or uncompr essed digital video from a D VI device . When you connect to a D VI de vice with a HDMI-to-DVI adapter cable , it transfers only video signal.
39 or Connections to other equipment (continued) T o connect the TV/D VD to a camcorder , or a TV Game T o pla yback from a camcorder , connect the camcorder to the unit as sho wn. This unit can also be used as a display de vice for man y video games.
40 GHOS TS Ghosts are caused by the tele vision signal follo wing two paths. One is the direct path and the other is reflected b y tall buildings, hills or other large objects. Changing the dir ection or position of the antenna may impro ve the reception.
41 Problems and tr oubleshooting Use the follo wing check list for troubleshooting when y ou have pr oblems with your TV/D VD . Consult y our local dealer or service outlet if problems persist. Be sure all connections are properly made when using with other units .
42 S YMPTOMS POSSIBLE SOLUTIONS P AGE DV D Playback doesn’t start. No disc is inserted. The disc may be dirty . Clean up the disc. The unit cannot play CD-R OMs, etc. • • • 26 8 8 No picture. TV/D VD selector is not set correctly . • 26 No sound.
43 Specifications MODEL L26HD35D L32HD35D GENERAL P ower supply A C 120V 60Hz P ower consumption Operation: 102W Stand by: 0.7W Operation: 108W Stand by: 0.7W W eight 8.8 kg (19.4 lbs) 12.0 kg (26.5 lbs) Dimensions Width: 663 mm (26-1/8 inches) Height: 495 mm (19-1/2 inches) Depth: 214 mm (8-7/16 inches) Width: 796.
44 TTE T echnology , Inc. (“TTE”) Limited W arr anty All LCD Models EX CEPT TO THE EXTENT PROHIBITED BY APPLIC ABLE LA W , THIS W ARRANTY DOES NO T CO VER, AND AS DESCRIBED BELO W TTE EXPRESSL Y D.
45 ANY BREACH OF ANY EXPRESS OR IMPLIED W ARRANTY ON THIS PRODUC T . THIS DISCLAIMER OF W ARRANTIES AND LIMITED W ARRANTY ARE GOVERNED B Y THE LA WS OF THE S T A TE OF INDIANA.
.................................................................................................. .................................................................................................. .....................................................
.................................................................................................. .................................................................................................. .....................................................
TTE T echnology , Inc. 101 West 103rd Str eet Indianapolis, IN 46290 ©2009 TTE T echnology , Inc. RCA and associated marks are trademarks of THOMSON S.A. used under license to TTE Corporation. Printed in Thailand Please do not send any products to the Indianapolis address listed in this manual or on the carton.
An important point after buying a device RCA L26HD35D (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought RCA L26HD35D yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data RCA L26HD35D - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, RCA L26HD35D you will learn all the available features of the product, as well as information on its operation. The information that you get RCA L26HD35D will certainly help you make a decision on the purchase.
If you already are a holder of RCA L26HD35D, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime RCA L26HD35D.
However, one of the most important roles played by the user manual is to help in solving problems with RCA L26HD35D. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device RCA L26HD35D along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
