Instruction/ maintenance manual of the product System 2.5 AudioSource
Go to page of 4
Owner’ s Manual Sy stem 2.5 Home Theater Speaker Set Congratulations on your purchase and welcome to the AudioSource family of satisfied customers. Please take a few moments to rea d this manual before you get started. Also, be sure to retain this document should you need to refer to it in the future.
Hooking Them Up The five-way binding posts accommodate nearly any type of connector and up to 14-gauge wire. For bare wire, press the binding post in to reveal the eye, thread the wire into the eye, and release the spring-loaded connector . For banana plugs, simply insert the p lug into the end of the connector .
Hi Level In These inputs are designed to accept an amplified signal from the speaker outputs of a receiver , power amp or other device not equipped with line level outputs. Hi Level Out The original amplified signal from your source is present at these outputs, for connection to the existing left and right speakers.
Read Instructions All the safety and operating instructions should be read before the appliance is operated. Retain Instructions The safety and operating instructions should be adhered to. Heed Warnings All warnings on the appliance and in the operating instructions should be adhered to.
An important point after buying a device AudioSource System 2.5 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought AudioSource System 2.5 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data AudioSource System 2.5 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, AudioSource System 2.5 you will learn all the available features of the product, as well as information on its operation. The information that you get AudioSource System 2.5 will certainly help you make a decision on the purchase.
If you already are a holder of AudioSource System 2.5, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime AudioSource System 2.5.
However, one of the most important roles played by the user manual is to help in solving problems with AudioSource System 2.5. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device AudioSource System 2.5 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
