Instruction/ maintenance manual of the product MX500 Razor
Go to page of 13
OWNER’S MANUAL Read and understand this entire manual before riding! DO NOT RETURN TO STORE! NOTE: Manual illustrations are for demonstration purposes only . Illustrations may not reflect exact appearance of actual product. Specifications subject to change without notice.
WARNING: Riding an electric motorbike can be a hazardous activity . Certain conditions may cause the equipment to fail without fault of the manufacturer .
BEFORE YOU BEGIN 2 WARNING: DO NOT USE NON-RAZOR PRODUCTS WITH YOUR RAZOR DIRT ROCKET . The Dirt Rocket has been built to certain Razor design specifications. The original equipment supplied at the time of sale was selected on the basis of its compatibility with the frame, fork and all other parts.
3 ASSEMBL Y AND SET -UP 1 Place the handlebars in the handlebar clamps. Note: Handlebar clamps are located in the plastic bag. 2 Align parallel to the fork and tighten the bolts using a 6mm Allen wrench. When properly tightened, the handlebars should not move forward or back.
4 ASSEMBL Y AND SET -UP Inflating the T ires T ires are inflated when shipped, but they invariably lose some pressure between the point of manufacturing and your purchase. Note: The pressurized air supplies found at gasoline stations are designed to inflate high-volume automobile tires.
WARNING: The brake is capable of causing the electric motorbike to skid the tire throwing an unsuspecting rider . Practice in an open area free from obstacles until you are familiar with the brake function. Avoid skidding to a stop as this can cause you to lose control or damage the rear tire.
q Chain and T ire Replacement Tools required: Phillips screwdriver and two (2) 19mm open wrenches. 1 Loosen screw and remove chain guard. 2 Using two 19mm wrenches, loosen both axle nuts. 3 Push the chain tensioner down to loosen the chain and remove the chain from the wheel sprocket and motor sprocket.
7 q Chain and Sprocket The chain will typically have a “loose spot” and “tight spot” corresponding with a particular sprocket rotational position. This is normal and common to all chain driven products due to run-out tolerances of the freewheel and sprocket.
REP AIR AND MAINTENANCE q Battery Care and Disposal Do not store the battery in temperatures above 75° F or below -10° F . CONT AINS SEALED NON-SPILLABLE LEAD BA TTERIES. BA TTERIES MUST BE RECYCLED. Disposal: Y our Razor product uses sealed lead-acid batteries which must be recycled or disposed of in an environmentally sound manner .
9 Motor bike does not run Motor bike was running but suddenly stopped Short run time (less than 15 minutes per charge) Motor bike runs sluggishly Sometimes the motor doesn’t run, but other times it .
10 Keep your MX500/MX650 running for years with genuine Razor parts. Visit our web site or e-mail us for more information on spare part availability . (Specifications subject to change without notice.) MX500 / MX650 P ARTS Need Help? Visit our website for replacement parts, product support and a list of authorized service centers at www .
11 SB 1918 (CALIFORNIA) DECLARA TION YOUR INSURANCE POLICIES MA Y NOT PROVIDE COVERAGE FOR ACCIDENTS INVOL VING THE USE OF THIS SCOOTER/ELECTRIC RIDE-ON PRODUCT . TO DETERMINE IF COVERAGE IS PROVIDED, YOU SHOULD CONT ACT YOUR INSURANCE COMP ANY OR AGENT .
T ire Inflation Periodically inspect the tires for excess wear and replace as required, and regularly check the tire pressure and re-inflate as necessary . If you get a flat tire, the inner tube can be patched or a new tube can be purchased from Razor or an authorized repair center .
An important point after buying a device Razor MX500 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Razor MX500 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Razor MX500 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Razor MX500 you will learn all the available features of the product, as well as information on its operation. The information that you get Razor MX500 will certainly help you make a decision on the purchase.
If you already are a holder of Razor MX500, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Razor MX500.
However, one of the most important roles played by the user manual is to help in solving problems with Razor MX500. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Razor MX500 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
