Instruction/ maintenance manual of the product E200 Razor
Go to page of 13
Owner’s Manu al Item Number: E200 13112430 E200S 13112730 E225 13112801 Read and understand this entire manual before riding! DO NOT RETURN TO STORE! NOTE: Manual illustrations are for demonstration purposes only . Illustrations may not reflect exact appearance of actual product.
Safety Warnings ............................................................... 1 Before Y ou Begin .............................................................. 2 Assembly and Set-Up .................................................... 3-4 Hardware Maintenance .
BEFORE YOU BEGIN 2 WARNING: DO NOT USE NON- RAZOR PRODUCTS WITH YOUR RAZOR ELECTRIC SCOOTER. The scooter has been built to certain Razor design specifications. The original equipment supplied at the time of sale was selected on the basis of its compatibility with the frame, fork and all other parts.
3 ASSEMBL Y AND SET -UP 1 Use the valve extender/ adapter located in the end of the right handlebar grip. 2 Open the round cover located on the chain cover by sliding the cover upward. Align the opening in the drive sprocket with the valve stem. Thread the adapter completely onto the valve stem and attach the pump.
4 ASSEMBL Y AND SET -UP Need Help? Visit our web site for replacement parts, product support and a list of authorized service centers at www .razor .com or call toll-free at 866-467-2967 Monday - Friday 8:00AM - 5:00PM Pacific T ime.
5 REP AIR AND MAINTENANCE CONNECTORS/HARDW ARE MAINTENANCE Safety Gear Always wear proper protective gear such as an approved safety helmet. Elbow pads and kneepads are recommended.
6 q Chain and Rear T ire Replacement Tools required: Phillips screwdriver, 10mm wrench, two (2) 8mm wrenches, and two (2) 17mm wrenches. 1 With a Phillips screwdriver , loosen the two screws and remove the chain guard. 2 With a 10mm wrench, loosen the brake cable anchor and disconnect the cable.
7 REP AIR AND MAINTENANCE q Front T ire Replacement Tools required: two (2) 17mm wrenches and a flathead screwdriver . 1 Using two 17mm wrenches, loosen the front axle bolts by turning the wrenches counter clockwise. 2 Remove wheel and install re- placement wheel.
q Adjusting the Chain Tools required: 10mm wrench, two (2) 8mm wrenches, and two (2) 17mm wrenches. 1 Using two 17mm wrenches, loosen the rear axle bolts by turning the wrenches counter clockwise. 2 Using two 8mm wrenches, loosen the brake housing an- chor bolts which is located in the long slot on the left side of the rear fork.
9 TROUBLESHOOTING GUIDE Scooter does not run Scooter suddenly stopped working while in use Short run time (less than 15 minutes per charge) Scooter runs sluggishly Sometimes the scooter doesn’t run,.
10 Keep your scooter running for years with genuine Razor parts. Visit our web site or e-mail us for more information on spare part availability . (Specifications subject to change without notice.
SB 1918 (CALIFORNIA) DECLARA TION YOUR INSURANCE POLICIES MA Y NOT PROVIDE COVERAGE FOR ACCIDENTS INVOL VING THE USE OF THIS SCOOTER/ELECTRIC VEHICLE. TO DETERMINE IF COVERAGE IS PROVIDED, YOU SHOULD CONT ACT YOUR INSURANCE COMP ANY OR AGENT .
01/2010 Community Design No. 130919-0001 U.S. Design Patent D497,397 S U.S. Desing Patent D513,629 S Canadian Design Registration No. 105673 Printed in China for: Razor USA LLC PO Box 3610 Cerritos, CA 90703 Copyright © 2003-2010 Razor USA LLC. All rights reserved.
An important point after buying a device Razor E200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Razor E200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Razor E200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Razor E200 you will learn all the available features of the product, as well as information on its operation. The information that you get Razor E200 will certainly help you make a decision on the purchase.
If you already are a holder of Razor E200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Razor E200.
However, one of the most important roles played by the user manual is to help in solving problems with Razor E200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Razor E200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
