Instruction/ maintenance manual of the product 13111290 Razor
Go to page of 14
Owner’s Manu al Read and understand this entire manual before riding! DO NOT RETURN TO STORE! NOTE: The eSpark must be traveling up to 3mph before motor will engage. Kick start up to 3mph while twisting the throttle to engage motor . 13111290 Item Number: NOTE: Manual illustrations are for demonstration purposes only .
SAFETY W ARNINGS Safety Warnings ......................................................... 1-2 Before Y ou Begin ........................................................... 3 Assembly and Set-Up ................................................. 3-5 Connectors/Hardware Maintenance .
PROPER RIDING A TTIRE Always wear proper protective equipment such as an approved safety helmet (with chin strap securely buckled), elbow pads and kneepads. A helmet may be legally required by local law or regulation in your area. A long-sleeved shirt, long pants, and gloves are recommended.
Remove contents from box. Remove the foam separators that protect the components from damage during shipping. Inspect the contents of the box for scratches in the paint, dents or kinked cables that may have occurred during shipping.
4 ASSEMBL Y AND SET -UP q Attaching the Handlebars Charger q Inflating the T ire The front tire is inflated when shipped but it invariably may lose some pressure between the point of manufacturing and your purchase.
CONNECTORS/HARDW ARE MAINTENANCE Safety Gear Always wear proper protective gear such as an approved safety helmet. Elbow pads and kneepads are recommended. Always wear athletic shoes (lace-up shoes with rubber soles), never ride barefooted or in sandals, and keep shoelaces tied and out of the way of the wheels, motor and drive system.
6 Need Help? Visit our web site for replacement parts, product support and a list of authorized service centers at www .razor .com or call toll free 866-467-2967 Monday - Friday 8AM - 5PM Pacific T ime. REP AIR AND MAINTENANCE T urn power switch “OFF” before conducting any maintenance procedures.
q Chain and Rear Wheel Replacement Tools required: Phillips screwdriver, 10mm open wrench, two (2) 8mm open wrenches, and two (2) 13mm open wrenches. 1 With a Phillips screwdriver , loosen the two screws on the chain guard and remove the chain guard. 2 Using two 13mm open wrenches, loosen the locknuts by turning the wrenches counter clockwise.
8 Need Help? Visit our web site for replacement parts, product support and a list of authorized service centers at www .razor .com or call toll free 866-467-2967 Monday - Friday 8AM - 5PM Pacific T ime. q Battery Care and Disposal Do not store the battery in temperatures above 75° F (23.
9 TROUBLESHOOTING GUIDE Scooter does not run Scooter suddenly stopped working while in use Short run time (less than 15 minutes per charge) Scooter runs sluggishly Problem Possible Cause Solution Scooter must be traveling 3mph before motor will engage.
10 TROUBLESHOOTING GUIDE Sometimes the scooter doesn’t run, but other times it does Scooter makes loud noises or grinding sounds Problem Possible Cause Solution Loose wires or connectors Motor or electrical switch damage Chain is too dry Check all wires around the motor and all connectors to make sure they are tight.
Keep your scooter running for years with genuine Razor parts. Visit our website for more information on spare part availability . (Specifications subject to change without notice.
12 SB 1918 (CALIFORNIA) DECLARA TION YOUR INSURANCE POLICIES MA Y NOT PROVIDE COVERAGE FOR ACCIDENTS INVOL VING THE USE OF THIS SCOOTER/ELECTRIC RIDE-ON PRODUCT . TO DETERMINE IF COVERAGE IS PROVIDED, YOU SHOULD CONT ACT YOUR INSURANCE COMP ANY OR AGENT .
Razor Limited Warranty The manufacturer warranties this product to be free of manufacturing defects for a period of 90 days from date of purchase. This Limited Warranty does not cover normal wear and tear , tires, tubes or cables, or any damage, failure or loss caused by improper assembly , maintenance, or storage or use of the Razor eSpark™.
An important point after buying a device Razor 13111290 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Razor 13111290 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Razor 13111290 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Razor 13111290 you will learn all the available features of the product, as well as information on its operation. The information that you get Razor 13111290 will certainly help you make a decision on the purchase.
If you already are a holder of Razor 13111290, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Razor 13111290.
However, one of the most important roles played by the user manual is to help in solving problems with Razor 13111290. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Razor 13111290 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
