Instruction/ maintenance manual of the product Y-200 Series Raypak
Go to page of 7
Catalog No: 5000.64 Effective: 3-1-04 Replaces: NEW 4-20 mA / 2-10 VDC Input Control Module Used with Y-200 Series Electronic Boiler Sequencer & Outdoor Reset Control System Installation and Opera.
Installation and Operating Manual 4-20 mA / 2-10 VDC Input Control Module Contents Introduction ............................................................... 1 Important Safe ty Instructions .................................... 1 Installation ......
4-20 mA / 2-10 VDC Input Control Module Installation and Operating Manual Installation 1. Verify that the control signal is within the 4-20 mA / 2-10 VDC parame ter. 2. Turn off the power to the Y-200. 3. Open the front cover of the Y-200 to access the display/keypad do or .
Installation and Operating Manual 4-20 mA / 2-10 VDC Input Control Module Start-up NOTE: The 4-20 mA / 2-10 VDC Module can be set up for 4- 20 mA m ode or 2-10 VDC mode , not both. 4-20 mA Mode 1. Restore power to the Y- 200. 2. Set the SW1- 2 dip swit ch (4-20 m A) to the ON position, and th e SW1-1 dip switch (2-10 VDC) to the OFF position .
4-20 mA / 2-10 VDC Input Control Module Installation and Operating Manual Module Adjustment NOTE: The inst ructions belo w use a 140 °F setp oint temperature. 4-20 mA Module 1. Set the input device signal to 12 mA. 2. Remove 2- pin connector fr om J1 connector on Module.
LIMITED WARRANTY 4-20 mA / 2-10 VDC Module for Y-200 Series Electronic Bo iler Sequencer & Outdoor Reset Control System SCOPE OF WARRANTY Raypak, Inc. ("Raypak") warrants to the orig inal owner the Control System to be free from defects in materials and work- manship under normal us e and service for the applicabl e warrant y period.
www.raypak.com Raypak, Inc., 2151 Eastman Avenue, Oxnard, CA 93030 (80 5) 2 78-5300 Fax (805) 278-5468 Raypak Canada Limited, 2805 Sloug h St., Mississauga, Ontario, C anada L4T 1G2 (905) 677-7999 Fax (905) 677-80 36 Litho in U.
An important point after buying a device Raypak Y-200 Series (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Raypak Y-200 Series yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Raypak Y-200 Series - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Raypak Y-200 Series you will learn all the available features of the product, as well as information on its operation. The information that you get Raypak Y-200 Series will certainly help you make a decision on the purchase.
If you already are a holder of Raypak Y-200 Series, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Raypak Y-200 Series.
However, one of the most important roles played by the user manual is to help in solving problems with Raypak Y-200 Series. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Raypak Y-200 Series along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
