Instruction/ maintenance manual of the product 32-3003 Raritan
Go to page of 4
1 INTRODUCTION The Four Gallon Salt Feed System with Pump is designed for boats that operate in fresh or brackish water and can only be used with the Lectra/San ® MC TM . Salinity is monitored by the Lectra/San MC Control Panel and salt solution will automatically be added to the Lectra/San when needed.
2 INSTALLATION/ MOUNTING Locate salt feed system within twelve feet (3.6 m) of and on the same level as LST/MC treatment tank. Make sure tank is accessible for refilling. Secure salt feed tank (Fig. #1). PLUMBING 1. Drain and empty treatment tank for an existing system.
3 START UP Refer to the Start Up procedure outlined in the Lectra/San MC Manual. The following instructions are supplementary to those instructions. Note: If utilizing a VacuFlush toilet see Application Note (L286). 1. Check plumbing and electrical connections.
4 530 Orange Street, P.O. Box 1157, Millville, NJ 08332 USA Telephone: 856-825-4900 FAX: 856-825-4409 www.raritaneng.com Southern Office and Plant: 3101 SW Second Avenue, Fort Lauderdale, FL 33315 USA.
An important point after buying a device Raritan 32-3003 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Raritan 32-3003 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Raritan 32-3003 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Raritan 32-3003 you will learn all the available features of the product, as well as information on its operation. The information that you get Raritan 32-3003 will certainly help you make a decision on the purchase.
If you already are a holder of Raritan 32-3003, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Raritan 32-3003.
However, one of the most important roles played by the user manual is to help in solving problems with Raritan 32-3003. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Raritan 32-3003 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
