Instruction/ maintenance manual of the product 10" In-Wall Subwoofer AudioSource
Go to page of 4
AS10SW 10” In-W all Subwoofer Congratulations on your purchase of the Audio- Source AS10SW In-W all Subwoofer . This product is designed to reproduce the Low Frequency audio portion of your home entertainment system with ac- curacy and detail that will satisfy the most discrimi- nating listener .
out, the top of the “Easy-In” bracket should just clear the top of the drywall cut-out. Next gently lift and center the AS10SW into the cutout, and begin to tighten the 4 “Easy-In” bracket screws. (Fig. 5) T ighten the four mounting screws in the same manner until the speaker is properly aligned and held tight to the wall surface.
The AS10SW is designed to be used with the sub output of any 5.1 or 7.1 surround receiver/amplifi er . If not using a sub output with active low pass crossover , we recom- mend using an external active crossover or a passive crossover with a minimum crossover slope of 12db per octave @ 100 Hz.
AS10SW Specifi cations W oofer 10” Carbon Poly Cone with Butyl Surround Frequency Response 40 Hz to 200 Hz Impedance 8 Ohm Sensitivity 86dB@2.83V Recommended Amp Power 25 to 150 W atts Continuous Cut Out Dimension 10 1 1/16” x 10 1 1/16” (27.2cm x 27.
An important point after buying a device AudioSource 10" In-Wall Subwoofer (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought AudioSource 10" In-Wall Subwoofer yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data AudioSource 10" In-Wall Subwoofer - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, AudioSource 10" In-Wall Subwoofer you will learn all the available features of the product, as well as information on its operation. The information that you get AudioSource 10" In-Wall Subwoofer will certainly help you make a decision on the purchase.
If you already are a holder of AudioSource 10" In-Wall Subwoofer, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime AudioSource 10" In-Wall Subwoofer.
However, one of the most important roles played by the user manual is to help in solving problems with AudioSource 10" In-Wall Subwoofer. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device AudioSource 10" In-Wall Subwoofer along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
