Instruction/ maintenance manual of the product ET-1125 Radio Shack
Go to page of 28
Cat. No. 43-1125 OWNER’S MANUAL Please read before using this equipment. ET-1125 900 MHz Digital Spread Spectrum Cordless Telephone with Caller ID/Call Waiting ID A.
2 FEATURES Your RadioShack 900 MHz Digital Spread Spectrum Cordless Telephone uses advanc ed technolo gy to give you superior audio q uality and extende d range.
3 Security Access- Protection Code — automatically prevents ot her cordless phone users from using your phone line while the handset is off the base. Auto Talk — lets you set the phone so you can answer a call simply by lifting the handse t from the b ase.
4 If you use more than on e phone or othe r device on the line, ad d up all of the RENs. If the total is mo re than five (or three in rural areas), yo ur telephones might not ring . If ringer operat ion is im- paired, remove a device from the line. Your phone complies wit h Part 68 of FCC Rules .
5 CONTENTS Installation .. ................ ................... ................. ................ ................... ................ ...... 6 Mounting t he Phone .............. ................ .................... ................ ................
6 INSTALLATION MOUNTING THE PHONE You can place th e phone on a desk or table, mount it on a standard wa ll plate, or mount it directly on a wall. Select a location that is: • near an AC outlet • .
7 3. Route the adap ter ’s cor d through the strain relie f slot on the base. 4. Plug the m odular cord’s other end into the pho ne jack. 5. Plug the adapter into a standar d AC outlet. 6. Lift the ba se’ s antenna to a ve rtical position. On a W all Plate or W all 1.
8 7. Lift the ba se’ s antenna to a ve rtical position. Note: To mount the phone directly on a wall, you need two screws (not supplied) with heads that fit into the key hole slots on the bottom of the base. Follow the steps under “ On a Wall Plate or Wall” on Page 7, then apply these ad- ditional instru ctions for placeme nt on a wall.
9 2. Lift the batte ry pack out of the com- partment. 3. Plug the bat tery pack’s connector in- to the socket in the comp artment, (the connec tor fits only one way ), re- place the batter y pack, and replace the cover . To charge the b attery pack, place the handset eit her faceup o r facedown on the base.
10 • If the display is blank and the phone does not work, rechar ge the batte ry pack. (The battery power might be too low to lig ht the display .) • If you are not goin g to use your phone for an extende d period of time, disconnect th e battery pack.
11 TU R N I N G A U T O TA L K ON/OFF Your phone is pr eset so you must pre ss TA L K when y ou lift the h andset from the base to answer a call. With aut o talk turned on, you can an swer a call by just lifting the ha ndset from th e base. If the handset is away fro m the base, you ca n answer by pressing any key.
12 3. Press CH/SELECT , then en ter your three-digi t area code. If you make a mistake, repeatedly pr ess / or #/ to move the cursor over the in- correct digi t, then enter the co rrect number . Note: If an are a code is a lready stored, it appear s on the display .
13 OPERATION A QUICK LOOK AT Y OUR PHONE Use FUNCTION to select your phone’s function s. Use TA L K t o make a call (see “Making and Receiving Calls” on Page 14). Use CALL ID to rev iew the Caller ID records. Use MEM to store o r re- call names and num- bers in memory (see “Memory Dialing” on Page 16).
14 MAKING AND RECEIVING CALLS To make a call, lift the han dset and press TA L K . Talk and the curren t vol- ume setting (see “Adjusting the Ha ndset Volume”) appear on t he handset’s dis- play, and the CHARG E/IN USE indicator on the base lights.
15 Notes: • Y ou can als o press REDIAL/P AUSE after pressing TA L K to dial the last number di aled. • The red ial memory h olds up to 32 digits, so you can redial long - distance as well as local numbers. • The redial memory al so holds pause entries.
16 MEMORY DIALING You can store u p to 20 phone numbers and names in memory, then dial a stored number by enter ing its memory loca tion number. Each number ca n be up to 20 d igits, an d each name can be up to 13 charact er s.
17 Editing or Deleting a Number in Memory Follow these steps t o edit or delete a memory numb er. 1. Lift the ha ndset. 2. Hold down MEM until Memory Store and a list of memory loca- tion numb ers appear on the displa y . 3. Choose a memory loca tion ( 01 – 20 ) by pressing a number or by repeat- edly pressing VOL/CID or .
18 You can also dial a memory number af- ter pressing TA L K . Press MEM (the dis- play does not change but the phon e’s memory recall a ctivates) then en ter a memory location nu mber.
19 CALLER ID OPERATION If you subscribe to Caller ID service from your phone company, the ph one compa- ny sends information about the call, as well as the time and date, betw een the first and second rings of every call yo u receive.
20 Caller ID Messages ADDING/DELETING THE AREA CODE When the area co de of the received call is the same as the one you stor ed (see “Storing Your Ar ea Code” on Page 11), the caller ID record does not sh ow the area code. If it is diffe rent, the record shows the area code.
21 STORING A CALLER ID RECORD TO MEMORY Follow these steps to store the name and number from a Caller ID record int o a memory location. 1. Press CALL ID then VOL/CID or to recall the rec ord you want to store. If you want t o add or delete t he area code, press 3 .
22 T ROUBLESHOOTING We do not expect yo u to have any problems with your phone, but if yo u do, these suggestions might help . Problem Suggestio n The phone d oes not wor k or works poorly . Be sure the base’ s phone line cor d and AC adapter are co rrectly and securely conne cted.
23 If you still have problems, disconnect the phone. If other phones on the s ame line work properly, t he fault is in t his phone or its installation. If you cannot fin d the prob- lem, take the phone to yo ur local RadioShack store fo r assist ance.
24 CARE AND MAINTENANCE Your RadioShack 900 MHz Digita l Spread Spectrum Cord less Telephone is an ex- ample of superior design and craftsmanship. The follow ing s uggestions will help you care for your phone so you ca n enjoy it for years. Keep the phone dry.
25 REPLACING THE BATTERY PACK If you follow the instructions in “Connect- ing and Charging the Bat tery Pack” on Page 8, the battery pack should la st about one yea r. If the battery pa ck does not hold a char ge for more than 2 hours after an overnight ch arge, replace it wit h a new 3.
26 advance. If advan ce notice is no t practi- cal, the phone co mpany notifies you as soon as possible and ad vises you of your right to file a complaint with the FCC. Also, the phone company can make changes to its lines, equi pment, opera - tions, or procedures t hat could affect th e operation of this telephon e.
27 NOTES.
RadioShack Corpor ation Fort W orth, T exas 76102 UCZZ01673ZA 09A00 Printed in China Limited One-Y ear W arranty This product is warranted by RadioShack against manufactu ring defects in material and .
An important point after buying a device Radio Shack ET-1125 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Radio Shack ET-1125 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Radio Shack ET-1125 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Radio Shack ET-1125 you will learn all the available features of the product, as well as information on its operation. The information that you get Radio Shack ET-1125 will certainly help you make a decision on the purchase.
If you already are a holder of Radio Shack ET-1125, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Radio Shack ET-1125.
However, one of the most important roles played by the user manual is to help in solving problems with Radio Shack ET-1125. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Radio Shack ET-1125 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
