Instruction/ maintenance manual of the product 43-3581 Radio Shack
Go to page of 8
© 2004 RadioShack Corporation. All Rights Reserved. RadioShack and RadioShack.com ar e trademarks used by RadioShack Corporation. OWNER’S MANUAL Please read before using this equipment. © 2004 RadioShack Corporation. All Rights Reserved. RadioShack and RadioShack.
Selecting a Location 2 The lightn ing symbol i s intended to alert you t o the presence of uninsul ated dangerou s voltage within this product ’s enclosure that migh t be of suff icient ma gnitude to constitute a risk of elec tric shock. D o not open t he product’ s case.
Using AC Power 3 USING AC POWER You can power the handset usin g the supplied 9V, 210 mA AC adapter. Insert the supplied AC adapter’s barrel plug into the DC IN 9V jack on the back of the charger. Route the cord through the strain relief slot and plug the adapter into a standard AC outlet.
Connecting/Charging the Battery 4 2. Plug the battery pack’ s connector into the socket in the compartment (the connector fits only one way), then place the battery pack in the compartment. Place handset on main base to register appears. 3. Replace the cover .
Registering the Handset 5 The supplied battery pack sh ould last for about a year. If the battery pack does not hold a charge for more than 2 hours after an overnight charge, replace it with a new 3.6- volt, 800 mAh battery pack with a connector that fits the socket in the battery compartment.
Care 6 3. While the handset is registering, Handset Registering will appear in the LCD. When Registration Complete is displayed, the handset has been registered to the base. If Registration Fai led appears, please try these steps again. Ô The handset is ready to operate .
The FCC Wants You t o Know 7 THE FCC WANTS YOU TO KNOW This device complies wi th Part 15 of the FCC Rules . Operation is su bject to th e following two cond itions: (1) this device may not cause harmful interference , and (2) this device must a ccept any interference received, including interference that may cause undesired operation.
RadioShack Corporation Fort Worth, Texas 76102 43-3581 UUZZ01858BZ 01A04 Printed in China • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver . • Connect the equipment into an outlet on a circuit different from that to which the rece iver is connected.
An important point after buying a device Radio Shack 43-3581 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Radio Shack 43-3581 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Radio Shack 43-3581 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Radio Shack 43-3581 you will learn all the available features of the product, as well as information on its operation. The information that you get Radio Shack 43-3581 will certainly help you make a decision on the purchase.
If you already are a holder of Radio Shack 43-3581, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Radio Shack 43-3581.
However, one of the most important roles played by the user manual is to help in solving problems with Radio Shack 43-3581. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Radio Shack 43-3581 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
