Instruction/ maintenance manual of the product 32-1230A Radio Shack
Go to page of 9
Installing the Ba ttery ............................................ 2 Low Battery Indications .............. ... ... ... .. ....... 3 Setting The Chann el ........................................... 3 Using More Than One Wireless System ...... 4 Operation .
© 2001 RadioShack Corporation. All Rights Reser ved. RadioShack and RadioShack.com are trademark s used by RadioShack Corporation. 32-1230 A OWNE R’S MANUAL — Please read be fore using this equipment.
2 the mics and receivers that have th e features that best fit your needs. This device comp lies with Pa rt 90 of the FCC Rules . There are a total of eight f re quencies available f or this microphone. Each microphone has ch annel s that can operate on three of these f requencies.
3 3. Replace the battery compartment cover and tighten the ball grill ass embly . Low Battery Indications The microphone’s BATT LOW ind icator tells you the condition of the battery. If the indicato r f lickers when you move the microphone’ s switch from OFF to STBY , t he battery is good.
4 channel B , you r recei ver must als o be set to channel B . Do not operate two systems in the same locatio n on the same channel or on adjacent chan nels.
5 minimizes interfer ence when you use m ore than one wireless sy stem. To set the transmitter chann el, do the following. 1. While holding the body of the microphone, carefu ll y unscrew and remove the tapered lower section of the microphone. Caution: Static electricity can damage your microphone.
6 2. Set the transmitter switch to t he desired channel. Do not handle t he printed circu it board or remove th e protective shiel d. 3. Replace the lower secti on of the microphone body .
7 Note: Experiment with the re ceiver’s volume sett in g and the settings of other compo nents in your audio system to obtain the best results. Using the Standby Setting The microphone’s STBY setting lets you turn of f the microphone without tu rning off the microphone’ s transmitter.
09A01 AO0075AAA1 32-1230A Printed in China B E ......... ............. .......... .............. ............. ............. .......... ............. ... 171.04 5 F ......... .......... ............. .............. ............. .......... ...........
An important point after buying a device Radio Shack 32-1230A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Radio Shack 32-1230A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Radio Shack 32-1230A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Radio Shack 32-1230A you will learn all the available features of the product, as well as information on its operation. The information that you get Radio Shack 32-1230A will certainly help you make a decision on the purchase.
If you already are a holder of Radio Shack 32-1230A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Radio Shack 32-1230A.
However, one of the most important roles played by the user manual is to help in solving problems with Radio Shack 32-1230A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Radio Shack 32-1230A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
