Instruction/ maintenance manual of the product Dynamic DX Quantum
Go to page of 8
Dynamic DX Finger Steering Control Basic Operation Instructions W ARNING! USE ONL Y IN DR Y CONDITIONS.
2 Basic Operation Instructions Finger Steering Control Copyright © 2001 Pride Mobility Products Corporation This manual describes basic operation for the Dynamic DX Finger Steering Control only and must be read in conjunction with the owner s manual supplied with your power chair .
Finger Steering Control Basic Operation Instructions 3 TABLE OF CONTENTS INTRODUCTION ................................................................................ 4 Dynamic DX Finger Steering Control ...............................................
4 Basic Operation Instructions Finger Steering Control INTRODUCTION W elcome to Quantum Rehab, a Division of Pride Mobility Products Corporation. Quantum Rehab is dedicated to the customization of power chairs for users with advanced rehabilitation and mobility issues.
Finger Steering Control Basic Operation Instructions 5 Status LEDs Green indicates fault codes; red indicates whether the Finger Steering Control is in Active Mode or Standb y Mode. Finger Steering Control Detects the position of the user's finger and translates that into an e xecutable command.
6 Basic Operation Instructions Finger Steering Control Figure 2. Finger Area Positioning NOTE: The Finger Steering Control should only be used in dry conditions or wher e sufficient pr otection fr om moistur e can be maintained. Allow the contr ol to dry thor oughly if it has been exposed to moistur e.
Finger Steering Control Basic Operation Instructions 7 Actuator Control While in Active Mode, hold your finger on the Active/Standby Switch to scroll through the drive programs and actuators. When you reach the actuator you wish to adjust, take your finger off of the switch.
8 Basic Operation Instructions Finger Steering Control Exeter , P A Quantum Hotline: 1-866-800-2002 V isit the Rehab Zone at: www .quantumrehab.com INFMANU1745/A/MA Y 2001 W ARNING! USE ONL Y IN DRY C.
An important point after buying a device Quantum Dynamic DX (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Quantum Dynamic DX yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Quantum Dynamic DX - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Quantum Dynamic DX you will learn all the available features of the product, as well as information on its operation. The information that you get Quantum Dynamic DX will certainly help you make a decision on the purchase.
If you already are a holder of Quantum Dynamic DX, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Quantum Dynamic DX.
However, one of the most important roles played by the user manual is to help in solving problems with Quantum Dynamic DX. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Quantum Dynamic DX along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
