Instruction/ maintenance manual of the product WCP-2 QSC Audio
Go to page of 4
1 QSControl.net™ Wall Control Plate Accessories Installation Guide Rev. B QSControl.net™ W all Control Plate Accessories INST ALLA TION GUIDE ▼ ▼ ▼ ▼ ▼ WCP-1 ▼ ▼ ▼ ▼ ▼ WCP-2 *TD-000215-00* Rev.
2 QSC Audio Products, Inc. QSControl.net™ Wall Control Plate Accessories I. INTRODUCTION The WCP-1 and WCP-2 are wall control plate accessories for QSControl.net network audio system components, such as Basis, RAVE, and DSP products. They allow an installer to create simple, non-computer user interfaces for these products in sound systems.
3 QSControl.net™ Wall Control Plate Accessories Installation Guide Rev. B R2 R1 10K CW CCW CW CCW Wiper Cut here to insert resistor R2 Cut here to insert resistor R1 The WCP-2 uses a six-position binary-coded decimal rotary switch. It connects to two (up to four usable positions) or three (up to six usable positions) OmniPorts on the QSControl.
4 QSC Audio Products, Inc. QSC Audio Products, Inc., 1675 MacArthur Boulevard Costa Mesa, California 92626 USA PH: +1 (714) 754-6175 FAX: +1 (714) 754-6174 QSControl2 is a trademark of QSC Audio Products, Inc. “QSC” and the QSC logo are registered with the U.
An important point after buying a device QSC Audio WCP-2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought QSC Audio WCP-2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data QSC Audio WCP-2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, QSC Audio WCP-2 you will learn all the available features of the product, as well as information on its operation. The information that you get QSC Audio WCP-2 will certainly help you make a decision on the purchase.
If you already are a holder of QSC Audio WCP-2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime QSC Audio WCP-2.
However, one of the most important roles played by the user manual is to help in solving problems with QSC Audio WCP-2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device QSC Audio WCP-2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
