Instruction/ maintenance manual of the product ADS52 QSC Audio
Go to page of 10
EN *TD-000139-00* TD-000139-00 rev .A AcousticDesign™ Multi-Use Loudspeaker AD-S52 and AD-S52T All-W eather 133 mm (5.25”) two-way with shielded woofer and neodymium tweeter “T” suffix models:.
EN 2 IMPORTANT SAFETY PRECAUTIONS & EXPLANATION OF SYMBOLS 1- Read these instructio ns. 2- Keep these instructio ns. 3- Heed all warnings. 4- Follow all instructio ns. 5- Clean only with a dry c loth. 6- Install in accorda nce with QSC Audio Product’ s instructions and a licensed, prof essional engineer .
EN 3 Introduction Thank you and congratulations on your purchase of the Ac ousticDesign AD-S52 multi-use, weather resistant loudspeakers. These products rep- resent the state-of-the-art in all- weather , lightweight SR (sound rein- forcement) loudspeaker systems.
EN 4 Mounting (continued) Ball Mount Adapte r The included ball mount adapter can be attached to almost any flat surface. The ball mount adapter’ s back plate can be removed, if desired. This will reduce the overall depth of the assembly and the footprint of the mount on the wall.
EN 5 Wiring Connect the amplifier’ s + and - outputs directly to the loud- speaker’ s + (red) and - (black) terminals. The binding post terminals accept wire, spade terminals, or banana plugs. Use only wire connections when using the Input Cover .
EN 6 Specifications Frequency Response 1 : 90- 20k Hz (-6 dB) 70- 21k Hz (-10 dB) Drivers: low frequency- 5.25” (133 mm) magnetically shielded high frequency- metallized dome, neodymium magnet structure Maximum Output 2 : 103 dB SPL continuous rms output (calculated) 106 dB SPL peak output Impedance: 8 ohms nominal 6.
EN 7 Dimensions.
EN 8 Painting the Loudspeaker The loudspeaker enclosure, grill, and mount can be painted to match any decor , provided the following precautions are observed. The cabinet is made of high impact polystyrene which requires cont rolled painting procedures in order to obtain good results.
.
QSC Audio Products, Inc. 1675 MacArthur Boulevard Costa Mesa, Californ ia 92626 USA ©2003 “QSC” and the QSC logo ar e registered with the U.S. Patent and T rademark Office.
An important point after buying a device QSC Audio ADS52 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought QSC Audio ADS52 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data QSC Audio ADS52 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, QSC Audio ADS52 you will learn all the available features of the product, as well as information on its operation. The information that you get QSC Audio ADS52 will certainly help you make a decision on the purchase.
If you already are a holder of QSC Audio ADS52, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime QSC Audio ADS52.
However, one of the most important roles played by the user manual is to help in solving problems with QSC Audio ADS52. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device QSC Audio ADS52 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
