Instruction/ maintenance manual of the product QT4 Q-See
Go to page of 7
Q- SEE QT4 and QT52X series Port Forwarding steps: DVR and PC need to be connected to the same Router. Things you need to know : 1. Router make and model 2.If customer changed the default router login, then need to know router login (user name and password) 3.
After the router has assigned the DVR an IP address Then return to the Network setup screen and enter this information into Go back to the Main Menu and click on the the table in the configuration scr.
If there is only one router in the network, then you just need to do STEP 3. But if it finds 2 Routers, and the connection looks like this: Then you need to complete two steps. First you want to proceed to STEP 3 to forward the ports to the IP address of Router 1.
Select the router from the drop down list. Enter the IP address of Router 1 (from Step 2). Enter the Username and Password for your router or use the default setting.
Input the information. Name: any name Type: TCP Start Port: 80 End Port: 80 IP add: IP of DVR Click on ADD Repeat for port 6036 The ports you added will now show on the list. Click on Update Router at the bottom. "Updating is in progress" message will display, wait until you see it say DONE at the bottom.
If for some a port or ports that you forwarded are not listed in the Router, and if you look on the SCRIPTS on left side and you see a message that the port already exists (Red box in image below), then you want to change the Port 80 to 85 in DVR and start over again.
Click on Begin and if it says port can be reached, it is setup correctly. STEP 4: SETTING UP DMZ IN ROUTER 2 (IF NEEDED FROM STEP 2) Step 1. Login into Router 1 by putting the IP of Router 1 into the Internet Explorer browser, as in example above where Router1 IP is 192.
An important point after buying a device Q-See QT4 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Q-See QT4 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Q-See QT4 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Q-See QT4 you will learn all the available features of the product, as well as information on its operation. The information that you get Q-See QT4 will certainly help you make a decision on the purchase.
If you already are a holder of Q-See QT4, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Q-See QT4.
However, one of the most important roles played by the user manual is to help in solving problems with Q-See QT4. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Q-See QT4 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
