Instruction/ maintenance manual of the product BT3 Q Acoustics
Go to page of 20
www.Qacoustics .co.uk EN.
.
Cont ents 04 Safety Information 05 Package C ontents 05 Introduction 05 Package Contents 06 Fea tures 06 Featur e Summary 06 Product Description 07 Instructions 07 Attaching the F eet 08 Featur es 12 .
Safety Information IMPORT ANT INFORMA TION - PLEASE READ CAREFULL Y Read and keep these instructions. Heed all warnings and follow all instructions. Do not use this apparatus near water . Clean only with a dry sof t cloth. Do not block any ventilation openings .
5 P ack age Contents Thank you f or purchasing Q Ac oustics. This manual is intended to take y ou through the setup and installation of the unit and will help pro vide a trouble free setup and optimum performance from the product.
F eatures • 2 x 50W stereo amplier in right hand speaker • Passiv e left hand speaker • 1 x 100mm woofer and 1 x 30mm dome tweeter per speaker • aptX® Bluetooth input – up to 8 paired devices • Digital optical audio input • RCA stereo line level audio input • 3.
Instruc tions 7 Attaching the F eet 1. 3. 2. 4..
Instruc tions TOP P ANEL 1. Standby / Source Select Long press / short press 2. V olume Down Single press / press and hold 3. V olume Up Single press / press and hold 4. Status LED See LED indications below Q-BT3 F eatures 8 2 1 4 3 FRONT VIEW 1 2 1. IR Sensor The IR sensor is hidden behind the speaker grill of the active right speaker .
Bluetooth Device: Q- BT3-101 REAR P ANEL 1 2 5 9 8 4 6 7 3 Instruc tions 9 1. Digital Optical Input 2. Analogue Line In 1 3. Analogue Line In 2 4. Subwoofer Out 5.
Instruc tions 10 DIGITA L 1. Digital Optical Input TOSLINK c onnector for connection to the Digital Optical output on a T V or other source. If there is a choice between Digital or Analogue connection to the unit choose Digital f or superior audio quality.
Instruc tions 11 Line In 2 The 3.5mm input jack is ideal for connecting to the headphone output of an external audio source using the 2m cable pro vided: HEADPHONES 3.5mm Jack Lead (included) The ANAL OGUE INPUTS are automatically selected when no Bluetooth device is connected and playing, and no Optical Digital Input signal is pr esent.
Instruc tions 12 Remote C ontrol 1. Po wer Press this butt on to turn the unit Standby ON/OFF . (POWER SWITCH on the r ear panel must be switched to ON) 2. Source Select Press this butt on to manually select the audio input source. The status LED will change colour accor dingly .
Instruc tions 13 POWER AND ST ANDBY Po wer on the unit at the A C SWITCH onc e all rear panel audio connections are made . The speakers will enter ST ANDBY , with a RED status LED . Exit ST ANDBY by pr essing the ST ANDBY button on either the t op panel or the IR remote.
P AIRING A BLUET OOTH DEVICE The unit is designed to automatically go in to pairing mode if there is no Bluetooth device connected. T o Pair your Bluetooth source: 1. Turn the unit and the Bluetooth device ON. 2. Make sure Bluetooth is enabled on the device to be P aired.
GOING OUT OF RANGE When a connected device goes out of range, the unit will r emain on the Bluetooth channel. When the device returns in range it will automatically r e- connect to the unit. In many cases PLA Y must be pressed on the device to resume audio playback.
CABLE/SA TELLITE REMOTE C ONTROL The Q Acoustics syst em has been designed for easy int egration into y our home entertainment system as it has the ability to be controlled by man y types of PROGRAMMABLE REMO TE CONTROL. This may include the remote contr ol for your SA TELLITE and CABLE system if it has PUNCH THR OUGH capability.
TV 1 2 3 6 5 4 7 8 9 0 VOL CLEAR MUTE Instruc tions 17 TYPE 2 ( CABLE) V olume up / down Mute / Standby • Press the “ T V ” button (top right of remote). • Point r emote awa y from receiv er , press and hold “Clear + V ol ”. • The remote ’ s LED will ash green twice.
Specication 18 Audio performance Pow er output: 2 x 50W for 100W total amplication THD (at rated pow er): <1.00% Fr equency response: ±0.5dB 20Hz to 20kHz S/N ratio (A-Wtd): -85dB Line in 1 (RCA phono) input sensitivity : 2.0Vrms Line in 1 (RCA phono) input overload: 2.
W arranty 19 The Bluetooth word mark and logos are regist ered trademarks owned by Bluetooth SIG, Inc. and an y use of such marks by Armour Home Electrioncs Ltd. is under license. The aptX® mark and the aptX logo are trade marks of CSR plc or one of its group companies and may be registered in one or mor e jurisdictions.
Q13924-IS_r7 www.Qacoustics .co.uk.
An important point after buying a device Q Acoustics BT3 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Q Acoustics BT3 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Q Acoustics BT3 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Q Acoustics BT3 you will learn all the available features of the product, as well as information on its operation. The information that you get Q Acoustics BT3 will certainly help you make a decision on the purchase.
If you already are a holder of Q Acoustics BT3, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Q Acoustics BT3.
However, one of the most important roles played by the user manual is to help in solving problems with Q Acoustics BT3. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Q Acoustics BT3 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
