Instruction/ maintenance manual of the product ATW-U102X Audio-Technica
Go to page of 12
U1 0 0 Ser i e s Camera-mount UH F Wir e l ess Micr ophone S yste ms A TW - U101 Body-pack T ransmitter System A TW - U101x Body-pack T ransmitter System A TW -U102 Plug-on T ransmitter System A TW -U.
2 U100 Series Compatible with 7000 Series Wireless For greater convenience and flexibility , receivers and transmitters in the Audio-T echnica U100 Series and 7000 Series are available individually and may be used interchangeably .
U100 Series Camera-mount UH F Wire l ess Micr ophone Systems Installation and Operation CAUTION! The circuits inside the receiver and transmitter have been precisely adjusted for optimum performance and compliance with federal regulations. Do not attempt to open the receiver or transmitter .
Receiver Setup Location The A TW-R100(x) receiver is designed primarily to be mounted to professional video cameras using the included hook & loop fasteners (mounting methods and positions will vary with the camera being used). However , the receiver will provide outstanding professional performance in other wireless applications as well.
5 4 3 2 1 1 Shield (Ground) Shield/Bias – Shield/Audio “–“ Shield/Audio “–“ 2 Bias + Out Bias + In Open Open 3 Lo-Z Mic In Mic Audio Mic Audio “+” Jumper to Pin 1 4 Source Loa d Jumper to Open Jumper to (2.2 k V ) Pin 1 Pin 1 5 Hi-Z Line In Ope n Open Line Audio ”+” A T W -T101 B A T T ON OFF S T .
6 BA T T ON X 10 X 1 0 5 4 3 2 1 9 8 7 6 0 5 4 3 2 1 9 8 7 6 CHANNEL MIC LEVEL OFF ST AND BY Lo Hi A TW-T102 Input Connector Power Switch (Off/Standby/On) Battery Condition Indicator Microphone Level Control Channel Selector Switches Fig. D Plug-on T ransmitter Setup Battery Selection and Installation Always use a fresh alkaline 9V battery .
System Operation Setting Channels Use the provided screwdriver to set the channel selector switches on the receiver and transmitter to the same frequency (Fig. A/C/D). As an example using a non-”x” unit, setting the X10 selector on “5” and the X1 selector on “2” designates channel 52, operating at 734.
8 Specifications † Optional Microphones and Cables Overall System UHF Operating Frequency “x” systems 656.125- 668.500 MHz non-”x” systems 728.
Audio - T echnica U100 Series UHF Wireless Operating Frequencies Multi-channel Systems Following are groupings of frequencies suggested for multi-channel wireless systems.
Audio - T echnica U100x Series UHF Wireless Operating Frequencies Multi-channel Systems Following are groupings of frequencies suggested for multi-channel wireless systems.
T en Tips T o Obtain The Best Results 1. Use only fresh alkaline batteries; replace the receiver batteries in pairs. Do not use “general purpose” (carbon- zinc) batteries. 2. Position the receiver so that it has the fewest possible obstructions between it and the normal location of the transmitter .
Audio - T echnica U .S ., Inc., 1221 Commerce Drive, Stow , Ohio 4 42 2 4 330/ 686 -2600 www .audio-technica.com P#2323-02100 P51176-01-B/W © 2002 Audio - T echnica U .
An important point after buying a device Audio-Technica ATW-U102X (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Audio-Technica ATW-U102X yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Audio-Technica ATW-U102X - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Audio-Technica ATW-U102X you will learn all the available features of the product, as well as information on its operation. The information that you get Audio-Technica ATW-U102X will certainly help you make a decision on the purchase.
If you already are a holder of Audio-Technica ATW-U102X, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Audio-Technica ATW-U102X.
However, one of the most important roles played by the user manual is to help in solving problems with Audio-Technica ATW-U102X. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Audio-Technica ATW-U102X along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
