Instruction/ maintenance manual of the product PDWM2500 Pyle
Go to page of 7
DU AL VHF WIRELESS SY STEM DU AL VHF WIRELESS SY STEM PDWM 2500 OPERA TION MANUAL.
DUAL V HF WIRELESS SYSTEM OPERA TION MANUAL 1 Precautions Hand-held microphone Receiver unit/operation Installation Trouble shooting Specifications Thank you for buying the PDWM2500 Wireless System. Please read through these operation instructions so you will know how to operate your model properly.
2 1. Unscrew the battery cover at the end of microphone, put a 9V battery into compartment with correct polarities, then close the cover. 2. Move "ON/OFF" switch to "ON" position, "PWR" indic ator comes on b lue. If it does n't come on, please check the voltage of battery or pola ritie s.
3 1.Pull out the antennas A and B. 2.Insert one end of attached audio cable into "AF OUT" on rear panel, and the other end into "MIC IN" or "AUX IN" of amplifier or mixer. 3.Connect the power adaptor from DC 12V of receiver to a main power socket.
4 Using the supplied audio cable, connect from the AF Output jack socket to the "MIC IN" / "LINE IN" socket on amplifier. Connect the mains power adaptor from "DC 12V" jack to a suitable mains power socket. Installation Location: At least 3 ft.
5 The on air indicator does not light up The wireless microphone is not turned on. Turn on the wireless microphone The microphone receiver is not turned on. Turn on the microphone receiver and the connected audio equipment The microphone receiver is not connected properly.
6 A.Overall system Oscillation mode: Quartz controlled Carrier Frequency Range: VHF 160~270MHz Frequency Stability: 30ppm Modulation Mode: FM Max Deviation: 75KHz Dynamic Range: >100dB S/N >60dB T .H.D: <0.5% Frequency Response: 80Hz~20KHz at 3dB Operating range: Operating T emperature: -20~50 B.
An important point after buying a device Pyle PDWM2500 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pyle PDWM2500 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pyle PDWM2500 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pyle PDWM2500 you will learn all the available features of the product, as well as information on its operation. The information that you get Pyle PDWM2500 will certainly help you make a decision on the purchase.
If you already are a holder of Pyle PDWM2500, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pyle PDWM2500.
However, one of the most important roles played by the user manual is to help in solving problems with Pyle PDWM2500. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pyle PDWM2500 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
