Instruction/ maintenance manual of the product PYD-1002 PYLE Audio
Go to page of 15
PYD-1002/PYD-1005.
Your PYLE PRO Series Performance Mixer is a sophisticated control center, perfect for mixing sound from multiple playback sources such as microphones, tuners, CD players, turntables or the audio outputs from a VCR. This mixer is ruggedly constructed for home or professional use.
Features and Controls: PYD1002 Mixer Dual Display Meter displays your choice of Master Input Left and Right Levels, or Phones Output Levels for CUE and PGM MIC Talkover Switch lowers the level of inpu.
Features and Controls: PYD1005 Mixer Dual Display Meter displays your choice of Master Input Left and Right Levels, or Phones Output Levels for CUE and PGM MIC Talkover Switch lowers the level of inpu.
Presetting the Controls Before Use Since sudden high output levels from your Pyle Pro mixer can damage not only audio devices connected to the mixer output but your hearing as well (especially if you are using headphones), please adjust the mixer’s controls BEFORE connecting AC power or turning on the unit.
4 – Pyle Pro Mixer Owner’s Manual This mixer permits connection of up to eight (8) audio input sources, including up to two microphones. Such a system might include, for example: Two Microphones T.
Pyle Pro Mixer Owner’s Manual – 5 Plug a pair of stereo headphones (not supplied) with a 1/4” plug into the Phones output. Using headphones not only affords you the opportunity to listen privately, but also enables you to monitor the incoming audio sources so you can locate an exact passage or section before mixing it in.
6 – Pyle Pro Mixer Owner’s Manual Using the Mixer Controls Turning on the Mixer 1. Turn on the output amplifier and temporarily set its volume to the minimum setting. 2. On the mixer, turn ON the power switch. The adjacent power LED will illuminate.
Pyle Pro Mixer Owner’s Manual – 7 Mixing the Inputs Follow these steps to mix the audio input sources. 1. Perform Steps 1 and 2 of “Turning on the Mixer.” 2. Set the selected audio input source’s volume to its minimum setting, turn it on, and set it to play (or speak continuously into the microphone).
8 – Pyle Pro Mixer Owner’s Manual Using the Microphone Incorporating Voice into the Mix To blend voice from the microphone with the audio program material, adjust the turn the MIC 1 Talkover Switch to ON and use the MIC1 level slider to increase or decrease the microphone level.
Pyle Pro Mixer Owner’s Manual – 9 Using the Tone Controls To enhance the sound or tailor the highs, mids (PYD-1005) and low frequencies for audio source input to the acoustics of a particular performance environment, you can adjust the BASS, MID (PYD-1005) and TREBLE tone controls.
10 – Pyle Pro Mixer Owner’s Manual Using the Master Balance Control (PYD-1005) In the typical performance environment, you will want the sound to appear to be coming from a point midway between the speakers. If the sound appears to be louder from one speaker, adjust the Balance Control until the sound is properly balanced.
Pyle Pro Mixer Owner’s Manual – 11 Using the “Punch” Controls (PYD-1005 ) This featured control lets you smoothly and quickly turn a playing source on and off, or switch between the two different input sources assigned to Crossfade Channel A and B.
12 – Pyle Pro Mixer Owner’s Manual Troubleshooting Your mixer should require very little maintenance. If you have problems, refer to the chart below for possible solutions. If you cannot solve the problem, contact a qualified technician for assistance.
13 – Pyle Pro Mixer Owner’s Manual All PYLE PRO products are carefully constructed and tested before shipment. Units purchased in the USA are warranted to be free of defects in material and workmanship for two (2) years from the date of purchase. This warranty is limited to the original retail purchaser of the mixer.
An important point after buying a device PYLE Audio PYD-1002 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought PYLE Audio PYD-1002 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data PYLE Audio PYD-1002 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, PYLE Audio PYD-1002 you will learn all the available features of the product, as well as information on its operation. The information that you get PYLE Audio PYD-1002 will certainly help you make a decision on the purchase.
If you already are a holder of PYLE Audio PYD-1002, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime PYLE Audio PYD-1002.
However, one of the most important roles played by the user manual is to help in solving problems with PYLE Audio PYD-1002. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device PYLE Audio PYD-1002 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
