Instruction/ maintenance manual of the product PLXR5 PYLE Audio
Go to page of 10
2 W A Y ELECTRONIC CROSSOVER WITH SUBWOOFER REMOTE CONTROL HIGH PERFORMANCE CAR AUDIO MODEL:PLXR5 www .pyleaudio.com.
1 INTRODUCTION FEA TURES:.
2 FUNCTIONS 1. SIGNAL INPUTS T o be connected to the output of the sour ce unit. 2. LOW P ASS SUBWOOFER OUTPUT TERMINALS T o be connected to the subwoofer channel amplifier left/right inputs. 3. HIGH P ASS CHANNEL OUTPUT TERMINALS T o be connected to the channel amplifier left/right inputs.
3 9. HIGH P ASS GAIN CONTROL For adjusting the channel output signal level. 10. SUBWOOFER STEREO/MONO SWITCH For selection of stereo or mono mode subwoofer output. 11. HIGH-P ASS FREQUENCY SELECTOR For selection of high-pass crossover fr equency between 80 Hz and 2.
4 ELECTRICAL & AUDIO CONNECTIONS.
5 ELECTRICAL & AUDIO CONNECTIONS Pr ecautions 1. T o pr event short circuits, be sure to disconnect the negativ e batter y gr ound lead before wiring the system up. 2. When you finish the installation, be sure to make one mor e check to be sur e everything is done correctly .
6 NOISE CHECK & SYSTEM ADJUSTMENT.
7 TROUBLE SHOOTING GUIDE.
8 INST ALLA TION INST ALLA TION.
9 SPECIFICA TIONS SPECIFICA TIONS Power source: 14.4 volts DC negative ground Input current 0.5 amp max Distortion: 0.01% THD at 1 V output level Frequency r esponse: 10Hz-30KHz ±3 dB S/N ratio (A weighted): >95dB Separation: 60 dB Crossover fr equencies (continuously variable): Low-pass: 35-400 Hz High-pass: 80-2.
An important point after buying a device PYLE Audio PLXR5 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought PYLE Audio PLXR5 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data PYLE Audio PLXR5 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, PYLE Audio PLXR5 you will learn all the available features of the product, as well as information on its operation. The information that you get PYLE Audio PLXR5 will certainly help you make a decision on the purchase.
If you already are a holder of PYLE Audio PLXR5, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime PYLE Audio PLXR5.
However, one of the most important roles played by the user manual is to help in solving problems with PYLE Audio PLXR5. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device PYLE Audio PLXR5 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
