Instruction/ maintenance manual of the product PLTV65R PYLE Audio
Go to page of 20
OWNER'S MANUAL Mobile Audio/Video System PL TV65R www .pyleaudio.com PLL Synthesizer Stereo Radio Built In Amplifier V ertical Adjustable And Horizontal Rotatable Panel Automatically Memory Stori.
CONTENTS 2 Important Safety Instruction Installation DIN Front-Mount (Method A) Installing the unit Removing the unit DIN Rear-Mount (Method B) Wiring Connection Operation Location and function of keys Switching on/off the unit Open/close the monitor and angle adjustment Remote sensor Liquid crystal display 6.
3 IMPORTANT SAFETY INSTRUCTION Please read the following safety instructions carefully. 1.This set has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this unit protect you if you observe the following procedures for installation, use and servicing.
53mm 182mm INST ALLA TION Choose the mounting location where the unit will not interfere with the normal driving function of the driver. Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system Use only the parts included with the unit to ensure proper installation.
5 Outer Trim Ring L Key Sleeve R Key INSTALLA TION Mount the sleeve by inserting the sleeve into the opening of the dashboard and bend open the tabs located around the sleeve with a screwdriver. Not all tabs will be able to make contact, so examine which ones will be most effective.
INSTALLA TION DIN REAR-MOUNT (Method B) 1. Factory radio mounting bracket 2. Car radio mounting bracket 3. Screw 4. After aligning the car radio mounting bracket with the factory radio mounting bracket, tighten the screws (5x5mm) at 2 places on each side.
7 ELECTRICAL CONNECTION Lch WHITE VIDEO YELLOW VIDEO YELLOW Lch WHITE Rch RED Rch RED SWITCH (ACC+) (SEPARATE BOX) (OPTIONAL) BRAKE 1 PINK VIOLET/BLACK ORANGE GREY/BLACK BLUE GREY VIOLET REAR Lch + GR.
8 OPERATION LOCATION AND FUNCTION OF KEYS Fig.A 23 22 5 25 27 26 Fig.B 6 9 8 1 7 15 28 29 30 31 32 33 18 14 10 13 17 11 3 2 16 12 4 19 20 21 24.
OPERATION LOCATION AND FUNCTION OF KEYS 9 47 42 37 35 41 40 38 44 34 36 39 43 46 49 48 51 52 50 53 45 1. 2. OPEN/CLOSE 3. MUTE 4. LCD 5. TFT Monitor 6. SEL 7. VOLUME 8. VOLUME 9. Reset 10. IR 11. BND 12. MODE 13. TUNING TUNING/TRACK (For CDC Version Only) 14.
Fig.3 10 OPERATION SWITCHING ON/OFF THE UNIT Switch on the unit by pressing POWER button (1) on the front panel or POWER button (34) on the remote control.
11 OPERATION REMOTE SENSOR There is a remote sensor IR (10) on the front panel. On the monitor, there is another remote sensor IR (26) to receive remote control signal.
12 OPERATION Adjusting the loud In loud mode, use VOLUME / buttons (7&8) or VOL / buttons(47) to switch between loud on and off. When LOUD on, "LOUD" will show on the display (4). Directly press LOUD button (52) to reinforce the bass output.
- Retrieve a Preset Station Press any one of the buttons (15) on the front panel or (37) on remote control to retrieve a station which had been stored in the memory in advance the chosen number is shown on display.
OPERATING WHEN THE MONITOR STRETCHING OUT When the monitor stretches out, the front panel of the unit is in state B (see Fig.B), you can operate the unit by using the current menu displayed on the 6.
15 OPERATION Then you can press VOL / buttons (48) to select hour or minute and press TUN/CH / buttons (47) to change the corresponding item. Menu Control operation in CDC mode Press MODE button (12) on front panel or MODE button (43) to select CDC mode.
display, you can press "1 "button then press "6" button to select 16 channel. 16 OPERATION Menu control operation In TV mode: Press MENU button (19) or (45). The menu will show on the display (5). 40 40 CONTRAST TINT 40 SEARCH 40 Press TUN/CH / buttons (46) to select the item upward or downward.
17 SPECIFICATION GENERAL Power Supply Requirements : DC 12 Volts, Negative Ground Maximum Output Power : 4x40 watts Current Drain : 15 Ampere (max.) TV Monitor Screen Size : 6.
MOBILE TV TUNER UNIT 18.
1 3 2 CONTROL & FUNCTION KEYS This unit can't be used separately and it must be used with other special system with the 13 -pin cable. The unit is connected to another system through the 13-pin din socket (3). And the unit can receive TV signal through the antenna input jack (2).
www .pyleaudio.com 88-T1690-04.
An important point after buying a device PYLE Audio PLTV65R (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought PYLE Audio PLTV65R yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data PYLE Audio PLTV65R - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, PYLE Audio PLTV65R you will learn all the available features of the product, as well as information on its operation. The information that you get PYLE Audio PLTV65R will certainly help you make a decision on the purchase.
If you already are a holder of PYLE Audio PLTV65R, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime PYLE Audio PLTV65R.
However, one of the most important roles played by the user manual is to help in solving problems with PYLE Audio PLTV65R. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device PYLE Audio PLTV65R along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
