Instruction/ maintenance manual of the product PLTV64R PYLE Audio
Go to page of 16
OWNER’S MANUAL Mobile V ideo System COLOR LCD TV/RECEIVER WITH CD CHANGER CONTROL PL TV64R.
2 Important Safety Instruction ........................................................................3 Installation ..................................................................................................... 4 Installation Hardware .......
3 IMPORT ANT SAFETY INSTRUCTION CAUTION: Please read and observe all warnings and instruction given in this owner’s manual and those marked on the unit. Keep these instructions. Retain this booklet for future refer ence. Please read the following safety instructions car efully .
Notes: • Choose the mounting location where the unit will not interfere with the normal driving function of the driver . • Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly .
5 MOUNTING THE TUNER UNIT 1. Bracket (A) 2. Mounting Bolt (M5 x 5) 3. Bracket (B) 4. Hexagonal Bolt with Washer (M6 x 12) 5. T apping Screw with W asher (M5 x 12) 6. Spring W asher (M6) 7. Spring W asher (M5) 8. Double Sided T ape INST ALL THE DISPLA Y UNIT Before install the display unit, please remove its tail scr ew and cable parts.
6 Removing the unit 1. Lever Insert the levers supplied with the unit into the grooves at both sides of the unit as shown in figure until they click. Pulling the levers upward and out to makes it possible to remove the unit. DIN REAR-MOUNT Installation using the screw holes on the both sides of the unit.
CAUTION: 1. If the TV control gr ey cable is connected to car brake, when the car is running, you cannot switch into TV mode, and the button (2) or (OPEN/CLOSE) button (31) is unavailable.
8 LOCA TION AND FUNCTION OF KEYS OPERA TION 10 4 3 8 4 5 7 1 6 14 11 12 13 15 19 20 18 17 21 16 9 2.
9 OPERA TION LOCA TION AND FUNCTION OF KEYS 1. PWR 20. SCN 2. 21. RND 3. MUT 22. TV/A V 4. LCD 23. 0 ~ 9 Numeric Buttons 5. T/F 24. -/-- Digital Selecting Button 6. SEL 25. MUTE 7. VOL 26. DSP (=SCREEN DISPLA Y) 8. VOL 27. SORT 9. RESET 28. CH + 10. IR 29.
GENERAL OPERA TION • ON/OFF Switch on the unit by pressing PWR button (1). When system is on, press it again to turn it off. • SELECTING SOUND MODE Press SEL button (6) to move display through volume, bass, tr eble, balance and fader functions. Use VOL (7) and VOL (8) buttons to adjust the selected mode.
11 OPERA TION RADIO OPERA TION • SELECTING BAND Press BND button (11) to change between three FM bands and two AM bands and one L W band. Each band stores up to six pr eset stations.
OPERA TION TV OPERA TION • REMOTE SENSOR On the screen display , there is a remote sensor IR (10) to r eceive remote contr ol signal. Y ou can point the remote contr ol handset to IR (10) and press function keys on the handset to control TV .
13 OPERA TION In this case, you also need to consider if the IR (10) is available. - When the display turns downward to a certain angle, it will draw in. • SELECTING RECEIVING MODE Press TV/A V button (22) to select among A V1/A V2/TV . • SELECTING CHANNEL - Press CH + button (28) or CH – button (29) to choose channel upward or downwar d.
14 OPERA TION • VOLUME ADJUSTMENT Press VOL + button (32) or VOL – button (33) to adjust volume level. • MUTE Press MUTE button (25) to mute the sound. Press the button again, the screen will display “ VOLUME XXX ” for about 4 seconds, and this is the AUDIO level setting value of the TV unit.
SPECIFICA TION 15 GENERAL P ow er Supply V oltage : DC 12 V olts, Negative Ground Maximum P o wer : 4 x 60 W atts Load Impedance : 10 Ampere (max.) Tone Controls - Bass (at 100 Hz) : + / – 10 dB - T r eble (at 10 KHz) : + / – 10 dB TV Monitor Screen Size : 6.
88-T1300-23.
An important point after buying a device PYLE Audio PLTV64R (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought PYLE Audio PLTV64R yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data PYLE Audio PLTV64R - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, PYLE Audio PLTV64R you will learn all the available features of the product, as well as information on its operation. The information that you get PYLE Audio PLTV64R will certainly help you make a decision on the purchase.
If you already are a holder of PYLE Audio PLTV64R, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime PYLE Audio PLTV64R.
However, one of the most important roles played by the user manual is to help in solving problems with PYLE Audio PLTV64R. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device PYLE Audio PLTV64R along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
