Instruction/ maintenance manual of the product PLCD32 PYLE Audio
Go to page of 12
OWNER’S MANUAL PLCD32 PLL SYNTHESIZER STEREO RADIO WITH COMP ACT DISC PLA YER DIGIT AL.
2 INST ALLA TION Notes: • Choose the mounting location where the unit will not interfer e with the normal driving function of the driver . • Before finally installing the unit, connect the wiring temporarily and make sur e it is all connected up properly and the unit and the system work pr operly .
3 1. Dashboard 2. Nut (5mm) 3. Spring washer 4. Scr ew (5 x 25mm) 5. Screw 6. Strap Be sure to use the strap to secur e the back of the unit in place. The strap can be bent by hand to the desired angle. 7. Plain washer Removing the unit 1. Frame 2. Insert fingers into the gr oove in the front of frame and pull out to remove the frame.
4 HOW TO REMOVE AND INST ALL THE FRONT P ANEL 1. Pr ess the release button and pull-of f the front panel. Keep front panel into the case. 2. T o install the fr ont panel, insert the panel into the housing and make sure the panel is properly installed, otherwise, abnormalities occurs on the display or some keys will not function properly .
5 WIRING CONNECTION Note: 1. For 2-speakers system, gr een, violet, white/black and grey/black wir e leads are unconnected and isolated. 2. For 2-speakers system, keep the fader indicator at center position to maintain the existing volume level. WHITE WHITE/BLACK GREEN GREEN/BLACK Lch SPK.
6 OPERA TION GENERAL OPERA TION • ON/OFF Switch on the unit by pressing any button [except button (4) and RELEASE button (7)]. When system is on, press button (9) to turn off the unit. • F ACEPLA TE RELEASE Press RELEASE button (7) to detach the removable faceplate.
7 • SOUND ADJUSTMENT Press SEL button (10) to select the desir ed adjustment mode. The adjustment mode will change in the following order: By pressing VOL button (11) or VOL button (12), it is possible to adjust the desired sound quality .
8 RADIO OPERATION • BAND SELECTION At tuner mode, press BND/LOU button (13) shortly to select the desir ed band. The reception band will change in the following or der: • ST A TION SELECTION Press TUNE/SEEK/TRACK button (16) or TUNE/SEEK/TRACK button (17) shortly to activate automatic seek function.
9 CD OPERA TION • SELECT TRACKS Press TUNE/SEEK/TRACK button (16) or TUNE/SEEK/TRACK button (17) to move to the previous track or the following track. T rack number shows on display . Hold TUNE/SEEK/TRACK button (16) or TUNE/SEEK/TRACK button (17) to fast reverse or fast forwar d.
10 SPECIFICA TION GENERAL P ower Supply Requirements : DC 12 V olts, Negative Ground Chassis Dimensions : 178 (W) x 165 (D) x 50 (H) Tone Controls - Bass (at 100 Hz) : + 10 dB / – 10 dB - T reble (at 10 KHz) : + 10 dB / – 10 dB Maximum Output P ow er : 40W x 4 (ch) Current Drain : 5 Ampere (max.
11 TROUBLE SHOOTING Before going thr ough the check list, check wiring connection. If any of the problems persist after check list has been made, consult your nearest service dealer . Symptom Cause Solution No power . The car ignition switch is If the power supply is properly not on.
88-C1040-28 www .pyleaudio.com.
An important point after buying a device PYLE Audio PLCD32 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought PYLE Audio PLCD32 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data PYLE Audio PLCD32 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, PYLE Audio PLCD32 you will learn all the available features of the product, as well as information on its operation. The information that you get PYLE Audio PLCD32 will certainly help you make a decision on the purchase.
If you already are a holder of PYLE Audio PLCD32, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime PYLE Audio PLCD32.
However, one of the most important roles played by the user manual is to help in solving problems with PYLE Audio PLCD32. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device PYLE Audio PLCD32 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
