Instruction/ maintenance manual of the product PLCD15MR PYLE Audio
Go to page of 14
OWNER’S MANUAL Mobile Audio System • PLL Synthesizer Stereo Radio • Digital Compact Disc Player • Automatically Memory Storing • Full Detachable Panel • Program CD T racks • CD Changer C.
2 Installation ..................................................................................................... 3 DIN Front-Mount....................................................................................................3 Installing the unit .
3 Notes: • The unit can be installed on the vehicle or the ships. • Choose the mounting location where the unit will not interfere with the normal driving function of the driver . • Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly .
1. Dashboard 2. Nut (5mm) 3. Spring washer 4. Screw (5x25mm) 5. Screw 6. Strap Be sure to use the strap to secur e the back of the unit in place. The strap can be bent by hand to the desired angle. 7. Plain washer Removing the unit 1. Before r emoving the unit, press the OPEN button to slide down the front panel.
T o Detach the Front Panel 1. Press the OPEN button, the fr ont panel will slide down. 2. When the front panel slides down, press the bottom button of the fr ont panel upward and pull it out fr om the panel bracket. 3. For safekeeping, store the fr ont panel in the supplied protective case immediately after being removed.
6 WIRING CONNECTION For 4 x 40W System GREEN GREEN/BLACK GREY GREY/BLACK VIOLET VIOLET/BLACK MAIN UNIT WHITE WHITE/BLACK FRONT Lch SPEAKER REAR Lch SPEAKER FRONT Rch SPEAKER REAR Rch SPEAKER Rch RED L.
7 GENERAL OPERA TION • ON/OFF Switch on the unit by pressing PWR button (9). When system is on, press PWR button (9) again to turn off the unit. Press PWR button (9) for mor e than 2 seconds, the button is operated to initial volume control button. When system power turns on, the volume is set to initial volume level.
8 display . If you select beep sound on, whenever press any button, beep sound output. • LOUDNESS Press LOUD (DIM) button (15) shortly to reinfor ce the bass output and display will show “ LOUD ” .
RADIO OPERA TION • BAND SELECTION At tuner mode, press BAND button (18) shortly to select the desired band. The reception band will change in the following order: FM1 FM2 FM3 AM1/MW1 AM2/MW2 • ST A TION SELECTION Press button (16) or button (17) shortly to activate automatic seek function.
CD OPERA TION • SELECT TRACKS Press button (16) or button (17) to move to the previous track or the following track. T rack number shows on display . Hold press button (16) or button (17) to fast reverse or fast forwar d. Disc play starts from when you r elease the button.
11 CD CHANGER OPERA TION • SELECT TRACKS Press button (16) or button (17) to move to the previous track or the following track. T rack number shows on display . Hold press button (16) or button (17) to fast reverse or fast forwar d. Disc play starts from when you r elease the button.
12 GENERAL P o wer Supply Requirements : DC 12 V olts, Negative Ground Chassis Dimensions : 178 (W) x 178 (D) x 50 (H) mm Tone Controls - Bass (at 100 Hz) : ± 10 dB - T reble (at 10 KHz) : ± 10 dB Maximum Output P o wer : 4 x 40 W atts Current Drain : 15 Ampere (max.
13 TROUBLE SHOOTING Before going thr ough the check list, check wiring connection. If any of the problems persist after check list has been made, consult your nearest service dealer . Symptom Cause Solution No power . The car ignition switch is If the power supply is properly not on.
88-C1802-xx www .pyleaudio.com.
An important point after buying a device PYLE Audio PLCD15MR (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought PYLE Audio PLCD15MR yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data PYLE Audio PLCD15MR - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, PYLE Audio PLCD15MR you will learn all the available features of the product, as well as information on its operation. The information that you get PYLE Audio PLCD15MR will certainly help you make a decision on the purchase.
If you already are a holder of PYLE Audio PLCD15MR, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime PYLE Audio PLCD15MR.
However, one of the most important roles played by the user manual is to help in solving problems with PYLE Audio PLCD15MR. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device PYLE Audio PLCD15MR along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
