Instruction/ maintenance manual of the product PLBASS10 PYLE Audio
Go to page of 4
10 Mounting the subwoofer 1. Find a suitable location in the vehicle in which to mount the amplifier. A typical location is shown below: 2. Make sure there is sufficient air circulation around the intended mounting location. 3. Mark. the location for mounting hole screws by positioning the cabinet where you wish to inst all it.
PLBASS10 1000 W atts Max 10” Super Slim Active Subwoofer 10” Slim woofer RCA low level input High level input Green & red LED power status indicator Remote level control Phase shift switch: 0 or 180° Adjustable input sensitivity: 0.
Low Level Input Wiring Low-level (RCA) input wiring is preferred for best audio performance. Most trunk or hatchback installations will require a 15-20 foot RCA cable, while pickup trucks and under-seat installations will require a 6-12 foot RCA cable.
Front panel controls and features CD POWER ON LED INDICATOR ® PHASE SHIFT Use this switch to help compensate for time alignment problems in the system. Such problems usually result from having the subwoofer at a different distance from the listener than the other speakers in the system.
An important point after buying a device PYLE Audio PLBASS10 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought PYLE Audio PLBASS10 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data PYLE Audio PLBASS10 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, PYLE Audio PLBASS10 you will learn all the available features of the product, as well as information on its operation. The information that you get PYLE Audio PLBASS10 will certainly help you make a decision on the purchase.
If you already are a holder of PYLE Audio PLBASS10, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime PYLE Audio PLBASS10.
However, one of the most important roles played by the user manual is to help in solving problems with PYLE Audio PLBASS10. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device PYLE Audio PLBASS10 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
