Instruction/ maintenance manual of the product PL2DNTV7 PYLE Audio
Go to page of 16
2-DIN TFT-LCD Monitor with TV/Radio tuner PL2DNTV7 Owner’s manual Please read it before using this equipment. www.pyleaudio.com.
CONTENTS Welcome ………………… ……………………… ………………………… …………… 1 Features …………………… …………………… …………………………… …………. 1 General Specifications …………………… …………………… …………………… ….
WELCOME Thank you for purchasing the TFT-LCD wide screen MONITOR. We are grateful for your sup port. Please read this user’s manual in its entirety before operating the unit. After reading this manual, be sure to keep it in a handy place for future reference.
2. Keep this manual handy for f uture reference. 3. Pay close attention to all war nings in this manual and follow the instr uctions carefully. 4. Never allow others to use the system until t hey have read and understood the operation instructions. SAFE T Y PR ECA U T ION S 1.
CAUTION! The material of display area i s made by glass w ith a prot ector film attached on it. Do not use hard or sharp objects to strike or scratch the surface of the display area. Otherwise it may cause the picture distorted or have scars forever .
7. Scan /RDM (1) DVD/CD changer mode Press this button to switch scan on/off, Press and hold to switch random on/off. (2) Radio mode Press this button to scan any available frequency and play each one in 5 seconds.
(2) Radio mode To switch the band in the follows order: FM1 > FM2 > FM3 > MW1 > MW2 press and hold this button to automatically search all stations and store the stations on band FM3 or MW2. 17. Audio CH Select Tone: JAZZ-ROCK-CLASSIC-POP-VOCAL-FLAT-EQ OFF.
27. RPT Under DVD mode, allows the user to repeat playback: repeat mode: disc, track/chapter 28. Angle + / - It is not available. USING REMOTE CONTROL Aim the IR remote control directly at the unit, or video source with an IR input. Tips: − Maximum IR distance is 3 meters from the sensor.
Front panel Button contro l 1. Remote sensor 2. Pow er ON/OFF ( ) 3. Mode 4. Next/Down ( ) 5. Previous/ UP ( ) 6. Play / Pause ( ) 7. CDC 8. Menu ( ) 9. Volume +/- or adjustment 1) Remote sensor For remote control. 2) Power on/off Press this power switch, the LCD monitor will turn on.
2.Press this button t o select the next track/ chapter when playing disc under DVD mode, and hold to fast forward until you release it. 3.To select the Next preset station under Radio mode. 4.To fine the current program under TV mode. 5) Previous / UP ( ) 1.
Basic Operation System adjustment Press [MODE] to change t he mode from AUX I N, RGB IN, REAR VIEW, RADIO MODE, TV MODE and DVD MODE. AUX IN It will display “NO SIGNAL” when there is no AUX in. RGB IN It will display “NO SIGNAL” when there is no RGB in.
DISP TIME ----- --------- O FF ADJ TIME ------ --------- 00:25 RADIO AREA ---------- EUROPE TV SYSTEM ------------ C.C.I.R EXIT And then, press [ ] again; it will display another page as below: RDS TA.
TV MODE Select stations Press and hold [ ] or [ ] for 3 seconds to automatically search stations and it will automatically store the stations of strongest signal in related band; or press and hold [ ] fo r 3 seconds to search stations automatically and then it wi ll automatically store stations of strongest signal.
EQ adjustment Press [ ] repeatedly when there are some pict ures on display to change from Volume, TA VOL, Bass, Treble, Balance or Fader. And then press [+] and [-] to adjust the value of related EQ option above.
Connection Layout Connect to your car 1. To prevent short circuits, remove the key from the ignition and disconnected the terminal of the battery. 2. Connect the wiring harness cables in the following order: ground wire, bat tery wire, ignition wire. Connect the input and output cable correctly to each unit.
4. Reconnect the terminal of the battery of procedure. Notes ● If your vehicle ignition does not come with an ACC position, connect the ignition cables to a power source that can be turned on and turned off with the ignition key.
An important point after buying a device PYLE Audio PL2DNTV7 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought PYLE Audio PL2DNTV7 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data PYLE Audio PL2DNTV7 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, PYLE Audio PL2DNTV7 you will learn all the available features of the product, as well as information on its operation. The information that you get PYLE Audio PL2DNTV7 will certainly help you make a decision on the purchase.
If you already are a holder of PYLE Audio PL2DNTV7, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime PYLE Audio PL2DNTV7.
However, one of the most important roles played by the user manual is to help in solving problems with PYLE Audio PL2DNTV7. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device PYLE Audio PL2DNTV7 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
