Instruction/ maintenance manual of the product AT-LP2D-USB Audio-Technica
Go to page of 8
USB Stereo T urntable System A T -LP2D-USB Installation and Operation.
2 Automatic Stereo T urntable System Installation and Operation T o prevent electric shock, do not remove the cover . There are no user-serviceable parts inside. Internal adjustments are for qualified professionals only . Refer all servicing to qualified service personnel.
3 Controls Figure 1 Main Features Front Back PHONO LINE USB 1. ST ART BUTTON Engages the motor/platter and begins automatic operation. 2. STOP BUTTON Disengages the motor/platter and returns tone arm to rest. 3. TONE ARM LIFT BUTTON Lifts and lowers tone arm for manual selection.
4 Assembling the T urntable The A T -LP2D-USB requires some assembly before first use. IMPORT ANT : Do not connect the AC power cord until assembly is complete. 1. Carefully place the turntable platter on the center spindle, making certain the platter is fully seated on the spindle.
5 Operation Automatic Operation 1. Remove the stylus guard from the stylus assembly (Fig. 4). 2. Put a record on the turntable. If needed, use the 45 RPM adapter (Fig. 5). 3. Select the size of record: 12" or 7" (Fig. 6). 4. Select the speed: 33 1 / 3 RPM or 45 RPM (Fig.
6 Replacing the Stylus While holding the head of the tone arm, rotate the front of the stylus assembly in a forward and down motion to remove it (Fig. 9). (As you remove the old assembly , note its position and “feel,” to aid in properly installing the new one.
7 T roubleshooting T urntable does not operate 1. Make certain the turntable’ s AC cord is plugged into an AC outlet, and that the AC outlet is “live.” 2. Check the drive belt to make certain it is on correctly . (See Figure 11.) A) Remove the record mat from the turntable platter (Fig.
Audio - T echnica U .S ., Inc., 1221 Commerce Drive, Stow , Ohio 4 42 2 4 330/ 686 -2600 www .audio-technica.com P5 1 98 3 ©2 0 0 7 Audio - T echnica U .S., Inc. Printed in China V isit our Web Site: www .audio-technica.com One - Y ear Limited Warranty Audio - T echnica brand products purchased in the U.
An important point after buying a device Audio-Technica AT-LP2D-USB (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Audio-Technica AT-LP2D-USB yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Audio-Technica AT-LP2D-USB - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Audio-Technica AT-LP2D-USB you will learn all the available features of the product, as well as information on its operation. The information that you get Audio-Technica AT-LP2D-USB will certainly help you make a decision on the purchase.
If you already are a holder of Audio-Technica AT-LP2D-USB, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Audio-Technica AT-LP2D-USB.
However, one of the most important roles played by the user manual is to help in solving problems with Audio-Technica AT-LP2D-USB. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Audio-Technica AT-LP2D-USB along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
