Instruction/ maintenance manual of the product ESW-R210 Audio Technica
Go to page of 8
UH F Wir e l ess S yste ms ESW -R210 UHF Synthesized Diversity Receiver Installation and Operation.
2 ESW-R210 UHF Synthesized Diversity Receiver Installation and Operation CAUTION! The circuits inside the receiver and transmitter have been precisely adjusted for optimum performance and compliance with federal regulations. Do not attempt to open the receiver or transmitter .
3 Output Connections There are two audio output jacks on the back panel: balanced (4 mV) and unbalanced (40 mV). Use shielded audio cable for the connection between the receiver and the mixer .
4 Receiver Controls And Functions Fig. B Receiver Front Panel Fig. C Receiver Rear Panel 1 2 3 4 6 7 8 9 10 5 11 12 13 14 15 16 17 18 15 UNBALANCED AUDIO OUTPUT JACK: 1 / 4 " phone jack. Can be connected to an unbalanced aux-level input of a mixer , guitar amp or tape recorder .
T urn down the mixer / amplifier level before starting up the wireless system. Switch on the receiver . Do not switch on the transmitter yet. Receiver On… The Channel Designator Display will light. If any of the RF LEDs light up at this point, there may be RF interference in the area.
6 Specifications † Receiver Accessories OVERALL SYSTEM Operating Frequency UHF band, 728.125 to 740.500 MHz Number of Channels 100 total Frequency Stability ±0.005%, Phase Lock Loop frequency control Modulation Mode FM Normal Deviation ±5 kHz T one Squelch Frequency 32.
7 Engineered Sound ® UHF Wireless Operating Frequencies Multi-channel Systems Following are groupings of frequencies suggested for multi-channel wireless systems.
Audio - T echnica U .S ., Inc., 1221 Commerce Drive, Stow, Ohio 442 2 4 330/ 686 -2600 www .audio-technica.com P#2323-02461 P5 1 248 -B/ W © 2000 Audio- T echnica U .S., Inc. Printed in Japan One - Y ear Limited Warranty Audio - T echnica professional wireless systems purchased in the U.
An important point after buying a device Audio Technica ESW-R210 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Audio Technica ESW-R210 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Audio Technica ESW-R210 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Audio Technica ESW-R210 you will learn all the available features of the product, as well as information on its operation. The information that you get Audio Technica ESW-R210 will certainly help you make a decision on the purchase.
If you already are a holder of Audio Technica ESW-R210, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Audio Technica ESW-R210.
However, one of the most important roles played by the user manual is to help in solving problems with Audio Technica ESW-R210. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Audio Technica ESW-R210 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
