Instruction/ maintenance manual of the product PAV80 PS Engineering
Go to page of 36
9800 Martel Road Lenoir City, TN 37772 P P A A V V 8 8 0 0 High-fidelity Audio-Video In-Flight Entertainment System With DVD/MP3/CD Player and Radio Receiver STC-PMA Document P/N 200-800-0101 Revision 5 February 2004 Installation and Operation Manual PS Engineering, Inc.
Table of Contents SECTION I GENERAL INFORMATION ........................................................................ 1-1 1.1 INTRODUCTIO N ........................................................................................................... 1-1 1.
PS Engineering PAV80 Series IFE System Installation and Operator’s Manual 200-800-0101 Page ii Rev. 5 Feb. 2004 3.5 D ISPLAY D IMMING (7) ..................................................................................................... 3-5 SECTION IV- WARRANT Y AND SERVICE .
PS Engineering PAV80 Series IFE System Installation and Operator’s Manual 200-800-0101 Page 1-1 Rev. 5 Feb. 2004 Section I GENERAL INFORMA TION 1.1 INTRODUCTION Quality cockpit and cabin entertainmen t has long been an elusive dream in general aviation.
PS Engineering PAV80 Series IFE System Installation and Operator’s Manual 200-800-0101 Page 1-2 Rev. 5 Feb. 2004 Operation is subject to the following con ditions: This device may not cause harmful i nterference. This device must accept any interference received, in cluding interference that may cause undesired opera- tion.
PS Engineering PAV80 Series IFE System Installation and Operator’s Manual 200-800-0101 Page 1-3 Rev. 5 Feb. 2004 PVT801 Video Terminal Unit FAA-TSO COMPLIANCE APPLICABLE DOCUMENTS: SAE AS8034 RTCA/D.
PS Engineering PAV80 Series IFE System Installation and Operator’s Manual 200-800-0101 Page 1-4 Rev. 5 Feb. 2004 Model Part Number Description PAV80 050-800-0100 DVD-IFE System with AM/FM CD MP3 PVT801 050-801-0100 LCD Video Display, 5.
PS Engineering PAV80 Series IFE System Installation and Operator’s Manual 200-800-0101 Page 1-5 Rev. 5 Feb. 2004 1.8 APPROVED AUDIO SYSTEMS This is a list of audio system that th e PAV80 should interface with adequately. Approved Audio Systems, PAV80 Certified interface is approved only for a udio systems that are FAA-TSO approved.
PS Engineering PAV80 Series IFE System Installation and Operator’s Manual 200-800-0101 Page 2-1 Rev 2 Sept. 2003 Section II - Inst allation 2.1 GENERAL INFORMATION 2.
PS Engineering PAV80 Series IFE System Installation and Operator’s Manual 200-800-0101 Page 2-2 Rev 2 Sept. 2003 2.00” 6.31” 2.3.3 Mounting Rack Installation Remove the unit from the m ounting tray by unscrewing the 3/32" hex-head screw that is near the l eft edge of the u nit.
PS Engineering PAV80 Series IFE System Installation and Operator’s Manual 200-800-0101 Page 2-3 Rev 2 Sept. 2003 Pa n e l O p en in g Saw a nd file us ed to remo ve exis tin g instrument panel from this location Figure 2-3 Completed panel opening (Typi cal) Figure 2-4 Completed panel installa tion 2.
PS Engineering PAV80 Series IFE System Installation and Operator’s Manual 200-800-0101 Page 2-4 Rev 2 Sept. 2003 B A C 120-425-4402 Connector 475-440-0007 (2 plcs) Screws F r o n t o f t r a y Rear of tray 475-632-0007 Screw (x2) Washer 475-632-0001 Nut 475-632-0005 430-730-0025 Tray Shield Figure 2-5 -Tray Assembly 2.
PS Engineering PAV80 Series IFE System Installation and Operator’s Manual 200-800-0101 Page 2-5 Rev 2 Sept. 2003 2.4.2 Pow er The PAV80-Series units are compatible with both 14 and 28 Volt DC systems. A five (5) Am p PULL-TYPE breaker is required. Power and ground wires m ust be a t wisted #18 AWG pair.
PS Engineering PAV80 Series IFE System Installation and Operator’s Manual 200-800-0101 Page 2-6 Rev 2 Sept. 2003 2.4.5 Aux Entertainment Audio and AUX Enable Besides the disc and AM/FM, the PAV8 0 has the ability to act as a switching control for an add itional en- tertainm ent input, both audi o and video.
PS Engineering PAV80 Series IFE System Installation and Operator’s Manual 200-800-0101 Page 2-7 Rev 2 Sept. 2003 Figure 2-8 PVA802 Dist. Amp Circuit breaker location (Typical) Connect the PVA802 to a 5-amp PULL TYPE circui t br eaker. The unit connector is a cri mp type, however, we recomme nd soldering the small conductors from the RG179 coax.
PS Engineering PAV80 Series IFE System Installation and Operator’s Manual 200-800-0101 Page 2-8 Rev 2 Sept. 2003 b. Evaluate the audio perform ance c.
PS Engineering PAV80 Installation and Operator’s Manual 200-800-0101 Page 3-1 Rev. 5 Feb. 2004 Section III OPERA TION GENERAL INFORMATION 3.1 SCOPE This section describes the operati on of the PAV80 In-Flight Entertai nment syst em. Operating controls consi st of two rotary knobs with push-push switches, and four but tons.
PS Engineering PAV80 Installation and Operator’s Manual 200-800-0101 Page 3-2 Rev. 5 Feb. 2004 3.2.4 The ►► Button (4) In disc mode, a short press of this button will advan ce to the next track. A longer press will put the disc into fast forward mode.
PS Engineering PAV80 Installation and Operator’s Manual 200-800-0101 Page 3-3 Rev. 5 Feb. 2004 Table 1-PAV80 Functions Action Disc Result Radio Result ▲ short press Stop ▲ long press Eject (also.
PS Engineering PAV80 Installation and Operator’s Manual 200-800-0101 Page 3-4 Rev. 5 Feb. 2004 3.4 Remote Operation The remote suppli ed is used to control vari ous functions of the secondary audio out put.
PS Engineering PAV80 Installation and Operator’s Manual 200-800-0101 Page 3-5 Rev. 5 Feb. 2004 3.5 Display Dimming The display can be adjusted for am bient light conditions by the connecti on to the aircraft dim mer bus. At mini mum bus voltage (or no lighti ng present) the display is set at m aximum .
PS Engineering PAV80 Installation and Operator’s Manual 200-800-0101 Page 4-1 Rev. 5 Feb. 2004 Section IV - W arranty and Service 4.1 Warranty In order for the factory warranty to be valid, the installations in a certif ied aircraft must be accomplished by an FAA-certified avionics shop and authorized PS Engineeri ng dealer.
PS Engineering PAV80 Installation and Operator’s Manual 200-800-0101 Appendix A Rev. 5 Feb. 2004 Appendix A – MP3 Creation 5.1 Creating M P3s from an Audio CD 1. Start MusicMatch JukeBox.( www.musicmatch.com ) Press the reco rder button, which is the small red dot located in the top right corner.
PS Engineering PAV80 Installation and Operator’s Manual 200-800-0101 Appendix B Rev. 5 Feb. 2004 Appendix B – Installation Drawings PAV80 Unit AUTOPILOT XPNDR AUDIO PANEL NAV/COM PIPER PN 101271-013 COPILOT'S PANEL ASSY.
PS Engineering PAV80 Installation and Operator’s Manual 200-800-0101 Appendix B Rev. 5 Feb. 2004 Intercom Jacks (existing) Video Jack (new) Typical, 1 each side 13 12 1110 9 4321 Located PVA802 1 GLP 7-11-03 12345 14 15 16 17 18 6789 19 20 21 22 10 23 24 11 12 25 13 Video Monitor Cable Video Monitor Cable PVA802 Distrib.
PS Engineering PAV80 Installation and Operator’s Manual 200-800-0101 Appendix B Rev. 5 Feb. 2004 Washer 475-632-0001 & Nut 475-632-0005 475-632-0007 (2 plcs) Screws Tray Shield 07 09 03 GLP 3 Add t b k h ll hi l Detail A A Rear of tray Front of tray 0.
PS Engineering PAV80 Installation and Operator’s Manual 200-800-0101 Appendix B Rev. 5 Feb. 2004 PVT801 Display Interface View from solder cup 1= Video Ground 2= Display Power 3= Power Ground 4= Video Signal 5= No Connection 1 2 3 45 Figure 6-4 Display connector layout 1.
PS Engineering PAV80 Installation and Operator’s Manual 200-800-0101 Appendix B Rev. 5 Feb. 2004 VIEWED FROM REAR Cable Exit 4.5 in 5.13 in Ø0.185 in (4 plcs) 6.
PS Engineering PAV80 Installation and Operator’s Manual 200-800-0101 Appendix B Rev. 5 Feb. 2004 RSH 07-09-03 NEW RELEASE CAGE CODE NONE IFE Breaker Location 0 A CHECKED BY: APPROVAL: SCALE ACTIVITY.
PS Engineering PAV80 Installation and Operator’s Manual 200-800-0101 Appendix B Rev. 5 Feb. 2004 Ø0.136 (4 plcs) 1.250 3.500 4.000 5.470 4.725 Figure 6-9 PVA802 Video Distribution Ampli fier Installation (Dwg.
PS Engineering PAV80 Installation and Operator’s Manual 200-800-0101 Appendix C Rev. 5 Feb. 2004 Appendix C Connector Interconnect 7.1 Single Display System Entertainment Output connected to audio p.
PS Engineering PAV80 Installation and Operator’s Manual 200-800-0101 Appendix C Rev. 5 Feb. 2004 Multiple Display System Wiring E n t e r t a i n m e n t O u t p u t c o n n e c t e d t o a u d i o .
PS Engineering PAV80 Installation and Operator’s Manual 200-800-0101 Appendix D Rev. 5, Feb. 2004 Appendix D- STC information and instructi ons for continuing airworthiness 8.1 Instructions for FAA Form 337, PAV80s The STC was developed using an Approve d Model List (AML).
PS Engineering PAV80 Installation and Operator’s Manual 200-800-0101 Appendix D Rev. 5, Feb. 2004 8.3 M aster Drawing List The following drawings are contained on the FAA-A pproved Master Drawing List, Document Number 002-800-1000: Title In this manual Part Number Revision Date Installation Manual X 002-800-0101 2 Sept.
PS Engineering PAV80 Installation and Operator’s Manual 200-800-0101 Appendix D Rev. 5, Feb. 2004.
PS Engineering PAV80 Installation and Operator’s Manual 200-800-0101 Appendix E Rev. 5 Feb. 2004 Appendix E RTCA DO160D/EUROCAE ED-14D Enviro nmental Qualification Form Part Number: 050-800-(-xxx) M.
An important point after buying a device PS Engineering PAV80 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought PS Engineering PAV80 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data PS Engineering PAV80 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, PS Engineering PAV80 you will learn all the available features of the product, as well as information on its operation. The information that you get PS Engineering PAV80 will certainly help you make a decision on the purchase.
If you already are a holder of PS Engineering PAV80, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime PS Engineering PAV80.
However, one of the most important roles played by the user manual is to help in solving problems with PS Engineering PAV80. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device PS Engineering PAV80 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
