Instruction/ maintenance manual of the product ATW-1811 Audio Technica
Go to page of 16
wireless wireless wireless wireless wireless 1 80 0 Series Camera - mount UHF Wireless Microphone Systems (single- channel) AT W - 18 1 1 UniPak ™ Body - pack T ransmitter System AT W - 18 1 2 Plug .
This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. This device complies with INDUSTRY CANADA R.
1800 Series Components (single- channel) Receiver and Included Components / Accessories AT W - 18 1 3 Camera - mount UHF Wireless Microphone System (single- channel) with Body - pack and Plug - on T r.
System Features (single-channel) • T rue Diversity operation for resistance to multi-path interference and dropouts • UHF reception with 996 frequencies selectable in 25 kHz steps • Automatic fr.
Quick Overview of System Operation Thank you for purchasing this Audio - T echnica 1 800 Series Single-channel Camera-mount UHF Wireless Microphone System.
A T W-R 1 8 10 Single - channel Receiver Controls (front panel) Liquid Crystal Display shows battery status and frequency settings. BNC-type antenna connectors. Attach the antennas to the antenna input jacks. Make certain that during operation there is a clear open-air path between the receiver antennas and the transmitters.
Output Receiver Level Control Monitor Level Control DC Input Monitor Output (rear panel) Balanced Audio Output Jack: T A3M-type connector . Pin 1: ground (shield); Pin 2: “audio +”; Pin 3: “audio –”.
A T W -R 1 81 0 Single-channel Receiver Batteries Each A TW-R1810 Single-channel Receiver uses four 1.5V AA batteries, not included. Alkaline type is recommended. Always replace all batteries. Make certain the receiver power is Off before replacing batteries.
Operating the Receiver NOTE: T ransmitter-Receiver pairs must be set to identical frequencies. Overview… 1. T o turn the receiver on, press and hold the Power/Set button until the Power LED lights, and the LCD window comes on (about 2-3 seconds). The operating frequency will show in the window after the power -up sequence.
Antenna Power -on LED LCD Audio Input Jack Microphone Input Power/Mute Button Up/Down Arrows Set Button Sliding Control Cover (3-position) Sliding Control Cover Battery Door Mounting Clip AT W - T 18 .
11 T ransmitter Batteries Each transmitter uses two 1 .5V A A batteries, not included. Alkaline type is recommended. Always replace both batteries. Make certain the transmitter power is Off before replacing batteries.
T ransmitter Functions RF Power Adjustments on your T ransmitter Audio Input Level (Gain) Adjustments on your T ransmitter Using the Mute and Un-Mute Functions on your T ransmitter Power/Mute Locks Au.
13 Operating the T ransmitter (continued) 1. A “PRESET” selection in the menu allows you to reset all transmitter functions to their factory - default values. 2. Press the Set button once to move to Menu mode. 3. Press the Up arrow twice to move to “PRESET” in the LCD window .
A vailable Accessories A T829cW Cardioid condenser lavalier microphone MT830cW Omnidirectional condenser lavalier microphone M T8 30 cW -T H “Theater” model, same as MT830cW except beige-color mic.
15 Overall System A TW-R1810 Single-channel Receiver A TW-T180 1 UniPak ™ Body-pack T ransmitter A TW-T 1802 Plug-on T ransmitter Specifications † UHF Operating Frequencies Band C: 54 1.500 to 566.375 MHz Band D: 655.500 to 680.375 MHz Number of Operating Frequencies 996 total per band (25 kHz increments) Frequency Stability ± 0.
One -Y ear Limited Warranty Audio - T echnica professional wireless systems purchased in the U.S.A. are warranted for one year from date of purchase by Audio - T echnica U.
An important point after buying a device Audio Technica ATW-1811 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Audio Technica ATW-1811 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Audio Technica ATW-1811 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Audio Technica ATW-1811 you will learn all the available features of the product, as well as information on its operation. The information that you get Audio Technica ATW-1811 will certainly help you make a decision on the purchase.
If you already are a holder of Audio Technica ATW-1811, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Audio Technica ATW-1811.
However, one of the most important roles played by the user manual is to help in solving problems with Audio Technica ATW-1811. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Audio Technica ATW-1811 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
