Instruction/ maintenance manual of the product RPM 5.1 Pro-Ject
Go to page of 8
INSTRUCTIONS FOR USE Pro-Ject RPM 5.1.
© Audio Trade GmbH · Pro-Ject RPM 5.1 / Ortofon 2M Re d · Revision 15.06.11/15.07.11 2 1 1.
© Audio Trade GmbH · Pro-Ject RPM 5.1 / Ortofon 2M Re d · Revision 15.06.11/15.07.11 3 PRO-JECT RPM 5.1 Controls, features and connections 1 Motor transportation screw (marked red) 2 Stepped drive .
© Audio Trade GmbH · Pro-Ject RPM 5.1 / Ortofon 2M Re d · Revision 15.06.11/15.07.11 4 Set-up Screw the three feet (23) onto the threaded bolts located on the underside of the plinth. Make sure the surface you wish to use the turntable on is level (use a spirit level) before placing the turntable on it.
© Audio Trade GmbH · Pro-Ject RPM 5.1 / Ortofon 2M Re d · Revision 15.06.11/15.07.11 5 Anti-skating force adjustment The anti-skating force must be adjusted corresponding to the downforce as follow.
© Audio Trade GmbH · Pro-Ject RPM 5.1 / Ortofon 2M Re d · Revision 15.06.11/15.07.11 6 Fitting and connecting the cartridge ** All cartridges with half inch mounting holes can be fi tted.
© Audio Trade GmbH · Pro-Ject RPM 5.1 / Ortofon 2M Re d · Revision 15.06.11/15.07.11 7 Potential incorrect use and fault conditions PRO-JECT turntables are manufactured to the highest standards and undergo strict quality controls before leaving the factory.
© Audio Trade GmbH · Pro-Ject RPM 5.1 / Ortofon 2M Re d · Revision 15.06.11/15.07.11 8 Accessories P ower supply T onearm counterweight Platter T onearm transport lock Please remove feet bevore rep.
An important point after buying a device Pro-Ject RPM 5.1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pro-Ject RPM 5.1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pro-Ject RPM 5.1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pro-Ject RPM 5.1 you will learn all the available features of the product, as well as information on its operation. The information that you get Pro-Ject RPM 5.1 will certainly help you make a decision on the purchase.
If you already are a holder of Pro-Ject RPM 5.1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pro-Ject RPM 5.1.
However, one of the most important roles played by the user manual is to help in solving problems with Pro-Ject RPM 5.1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pro-Ject RPM 5.1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
