Instruction/ maintenance manual of the product RPM 10.1 Evolution Pro-Ject
Go to page of 8
INSTRUCTIONS FOR USE Pro-Ject RPM 10.1 Evolution.
© Audio Trade GmbH · Pro-Ject RPM 10.1 Evolution · Re vision 2013.2.1 2 16 21 9 7 6a 15 6 18 8 9a 17 14 14 14.
© Audio Trade GmbH · Pro-Ject RPM 10.1 · Re vision 2013.2.1 3 Pro-Ject RPM 10.1 Evolution Controls, features and connections 1 Separate motor unit (motor and motor base) * 2 Stepped drive pulley 3 .
© Audio Trade GmbH · Pro-Ject RPM 10.1 Evolution · Re vision 2013.2.1 4 Set-up The deck is supplied partially disassembled and carefully packaged for safe transport.
© Audio Trade GmbH · Pro-Ject RPM 10.1 · Re vision 2013.2.1 5 Adjusting the vertical tracking angle (vta) Put a record and the record weight on the platter. W hen the needle is lowered into the record groove and the tonearm is not resting on the lift arm, the tube of the tonearm should be parallel to the surface of the record.
© Audio Trade GmbH · Pro-Ject RPM 10.1 Evolution · Re vision 2013.2.1 6 Connection to the amplifier The record player has gold plated female RCA phono sock ets (14) so you can substitute the interconnect ca bl e s supplied with higher quality cables such as the Pro-Ject Connect it interconnect cables for connection to the amplifier if you wish.
© Audio Trade GmbH · Pro-Ject RPM 10.1 · Re vision 2013.2.1 7 Useful tips The base and the record player should be positioned on a low-resonance surface such as wood or multiple layer ply board to avoid structural vibrations disturbing replay.
© Audio Trade GmbH · Pro-Ject RPM 10.1 Evolution · Re vision 2013.2.1 8 Accessories P ower supply Record weight Motor Motor base T onearm counterweight Platter T onearm transport lock Please remove.
An important point after buying a device Pro-Ject RPM 10.1 Evolution (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pro-Ject RPM 10.1 Evolution yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pro-Ject RPM 10.1 Evolution - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pro-Ject RPM 10.1 Evolution you will learn all the available features of the product, as well as information on its operation. The information that you get Pro-Ject RPM 10.1 Evolution will certainly help you make a decision on the purchase.
If you already are a holder of Pro-Ject RPM 10.1 Evolution, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pro-Ject RPM 10.1 Evolution.
However, one of the most important roles played by the user manual is to help in solving problems with Pro-Ject RPM 10.1 Evolution. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pro-Ject RPM 10.1 Evolution along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
