Instruction/ maintenance manual of the product INFMANU3210 Pride Mobility
Go to page of 24
Silv erStar SIL VER BOOM 300 www .silverstarlif ts.com www .pridemobility .com ™.
SAFETY GUIDELINES Copyright © 2007 Pride Mobility Products Corp. INFMANU3210/Rev D/September 2007 The symbols below are used throughout this owner's manual and on the product to identify warnings and important information. It is very important for you to read them and understand them completely .
3 SilverBoom 300 www .silverstarlifts.com CONTENTS I. INTRODUCTION ......................................................................................................................... 4 I I . SAFETY ...............................................
4 SilverBoom 300 www .silverstarlifts.com W elcome to Pride Mobility Products Corporation (Pride). Congratulations on the purchase of your new SilverBoom. The SilverBoom design combines the most advanced state-of-the-art components with modern, attractive styling.
5 SilverBoom 300 www .silverstarlifts.com II. SAFETY PRODUCT SAFETY SYMBOLS The symbols below are used on the lift system to identify warnings, mandatory actions, and prohibited actions. It is very important for you to read and understand them completely .
6 SilverBoom 300 www .silverstarlifts.com Av oid exposure to rain, snow , ice, salt, or standing water whenev er possible. Maintain and store in a clean and dr y condition. Disposal and recyc ling-Contact your authorized Pride Pro vider for inf or mation on pr oper disposal of your Pride product and its packaging.
7 SilverBoom 300 www .silverstarlifts.com LIFTING CAP ABILITIES The SilverBoom 300 is designed to lift a maximum weight of 300 lbs. (136 kg). Under no circumstances should the SilverBoom be made to exceed this weight limit.
8 SilverBoom 300 www .silverstarlifts.com III. INST ALLA TION The SilverBoom can be installed in either side of your vehicle. The illustrations demonstrate installation on the right side.
9 SilverBoom 300 www .silverstarlifts.com Figure 4. L-Base (T runk Installation) WHEEL WELL TRUNK INST ALLA TION (SIL VERBOOM 300 MANU AL RO T A TION ONL Y) Position the L-base as shown in figure 3. Y ou may need to situate the L-base so the wheel well does not interfere with the L-base extensions.
10 SilverBoom 300 www .silverstarlifts.com III. INST ALLA TION Figure 7. Motor Housing Installation 3 . Lower the motor housing over the upper post until it rests on the height adjustment ring. See figure 7 . WARNING! Pinch Point Hazard! Keep hands clear of the upper post when lowering the motor housing.
11 SilverBoom 300 www .silverstarlifts.com BOOM-ARM ADJUSTMENT Before adjusting the boom-arm, lower the lifting hook about 12 in. (30.5 cm). This will provide enough slack in the strap to enable the adjustable portion of the boom- arm (top tube) to be pulled out of the bottom tube to its farthest adjustment hole.
12 SilverBoom 300 www .silverstarlifts.com III. INST ALLA TION NOTE: Choosing the correct length bolt allows enough bolt-thread to pass through the undercarriage, ensuring enough room for the mounting washer and nut to be installed securely .
13 SilverBoom 300 www .silverstarlifts.com ELECTRICAL WIRING INST ALLA TION 1. Route the lift’ s long power wire (starting at the lift) through the interior of the vehicle until you reach the automobile battery . See figure 13 and 13A . Conceal the wire behind or under the interior panels (there should be existing holes).
14 SilverBoom 300 www .silverstarlifts.com III. INST ALLA TION ROUTE RED (+) POWER WIRE TO POSITIVE (+) BATTERY TERMINAL AUTOMOBILE BATTERY MOTOR HOUSING Figure 13.
15 SilverBoom 300 www .silverstarlifts.com IV . OPERA TION Figure 14. Hand Control (SilverBoom 300) PRESS TO OPERATE LIFTING STRAP IN A DOWNWARD DIRECTION PRESS TO OPERATE LIFTING STRAP IN AN UPWARD DIRECTION PROHIBITED! Avoid exposure to rain, snow , ice, salt, or standing water whenever possible.
16 SilverBoom 300 www .silverstarlifts.com LIFTING THE MOBILITY PRODUCT WARNING! Before operating the SilverBoom for the first time, be absolutely c er tain y ou ha v e the pr oper docking device for your mobility product. 1. Prepare your mobility product for transport.
17 SilverBoom 300 www .silverstarlifts.com WARNING! Pinch/Crush Hazard! Always keep hands clear of the lifting strap while the SilverBoom is lifting/ lowering a mobility product.
18 SilverBoom 300 www .silverstarlifts.com MANU AL LIFT STRAP OPERA TION The SilverBoom 300 with a power rotating base is equipped with a lift strap manual override that serves as backup in the event of a power failure.
19 SilverBoom 300 www .silverstarlifts.com V . TR OUBLESHOO TING LIFT WILL NO T OPERA TE " Check the circuit breaker reset button. Reset if nec- essary . See figures 21 and 22 . " Ensure all harness connections are secure. " Ensure the power wire leading to the positive battery terminal is tight and not corroded.
20 SilverBoom 300 www .silverstarlifts.com LIFTING STRAP TRA VELS IN OPPOSITE DIRECTION OF BUTT ON BEING PUSHED ON HAND CONTROL Before each use, check that the lifting strap is traveling in the proper direction. If the belt travels in the wrong direction when you press either the up or down button, you must restore proper lifting strap travel.
21 SilverBoom 300 www .silverstarlifts.com VI. MAINTENANCE SCHEDULE The following routine maintenance should be performed at the indicated intervals. Failure to perform the required maintenance procedures at the required intervals may void Pride’ s product warranty .
22 SilverBoom 300 www .silverstarlifts.com VII. WARRANTY THREE-YEAR TRANSFERABLE LIMITED WARRANTY For three (3) years from the date of purchase, Pride Mobility Products will repair or replace at our o.
.
*INFMANU3210*.
An important point after buying a device Pride Mobility INFMANU3210 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pride Mobility INFMANU3210 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pride Mobility INFMANU3210 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pride Mobility INFMANU3210 you will learn all the available features of the product, as well as information on its operation. The information that you get Pride Mobility INFMANU3210 will certainly help you make a decision on the purchase.
If you already are a holder of Pride Mobility INFMANU3210, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pride Mobility INFMANU3210.
However, one of the most important roles played by the user manual is to help in solving problems with Pride Mobility INFMANU3210. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pride Mobility INFMANU3210 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
