Instruction/ maintenance manual of the product PCM-MS2 Premier Mounts
Go to page of 13
INSTALLATION INSTRUCTIONS PCM-MS2 Universal Flat Panel Mount NORTH AMERICA EUROPE 3130 East Miralo ma Avenue Anaheim, CA 92806 USA USA and Cana da – Phone: 800 -368-9700 Fax: 800-832-4888 Swallow Ho.
PCM-MS2 Installation Manual Page - 2 - Table of Contents Warning Statements ........................................................................................................................................ - 2 - Parts List .....................
PCM-MS2 Page - 3 - Installation Manual Parts List This wall mount is shipped with all proper in stallation hardware and co mponents. Make sure that none of these parts are missing a nd/or dama ged before beginni ng installa tion. If there are part s missing and/o r damaged, please stop the installation and contact Premier Moun ts (800) 368-9700.
PCM-MS2 Installation Manual Page - 4 - Hardware Pack M 4x3 0( Q t y6 ) M 4x2 5( Q t y6 ) M 4x1 6( Q t y6 ) M5 x 30 ( Qty 6) M5 x 25 ( Qty 6 ) M5 x 16 ( Qty 6) M 6x4 5( Q t y6 ) M 6x3 0( Q t y6 ) M6 x .
PCM-MS2 Page - 5 - Installation Manual Thread Depth Indicator Step 1 . Insert the thread depth indicato r (supplied) through the thread inserts found on the back of the flat pan el to make sure the inserts measure the same full depth and mark it. Step 2 .
PCM-MS2 Installation Manual Page - 6 - Finding the Center of the Flat Panel Display Proper installation procedu re by qualified personnel as outlin ed in the installa tion in structions must b e adhered to. Failure to do so could result in pe rsonal injury and possi ble damage to the flat panel.
PCM-MS2 Page 7 Installation Manual Align t h e Moun ti ng B rac k e t s Inv e rt ed Fla t Pa ne l L C M ou n tin g Bra c ket C ent e r of Viewin g Gui de Cente r L ine Bo t t o m of Fla t Panel Step 3. Match the center of viewing guid e with the center line you marke d in step 1.
PCM-MS2 Installation Manual Page 8 Wall Plate End Covers Installation S N A P Step 1. Place the upper and lower wall plates on a flat surface. Step 2. Align the wall plate end cover with the wall plate center rods (see illustration above). Step 3. Attach the wall plate end cover to the upper and lower wall plates and press do wn firm ly.
PCM-MS2 Page 9 Installation Manual 16" Step 5. Level the wall plate with the reference arrow pointing up to the ceiling. Step 6. Drill eight (8) ¼" pilot holes to the marked wall. Step 7. Secure the upper and lower wall plates using the eight (8) 5/ 16" lag bolt s and flat was hers.
PCM-MS2 Installation Manual Page 10 Securing the Flat Panel to the Wall Mount AT LEAST (2) PE OPLE ARE STRONGL Y RECOMMENDED T O LIFT AND SEC URE THE FLAT PANEL T O THE WALL PLATE. FAILURE TO DO SO COUL D RESULT IN SERIOUS INJUR Y AND POSSIBL E DAMAGE TO THE FLAT PANEL .
PCM-MS2 Page 11 Installation Manual Lateral Shift Adjustment Step 1. Make any lateral shift adjustment and lock it by tighteni ng the two ( 2) M6 x 30m m (suppli ed) to the bottom of the m ounting brackets. LATERAL SH IF T Installing the Safety Knurl Knobs Step 1.
PCM-MS2 Installation Manual Page 12 Technical Specifications All measurements are in i nches(mm)..
PCM-MS2 Page 13 Installation Manual Warranty PREMIER MOUNTS LIMITED LIFETIME WARRANTY What and Who is Covered by this Limited Warranty and for How Long Premier Mounts warrants this product to be free from defects in material and workmanship for the lifetime of the original owner of this product.
An important point after buying a device Premier Mounts PCM-MS2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Premier Mounts PCM-MS2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Premier Mounts PCM-MS2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Premier Mounts PCM-MS2 you will learn all the available features of the product, as well as information on its operation. The information that you get Premier Mounts PCM-MS2 will certainly help you make a decision on the purchase.
If you already are a holder of Premier Mounts PCM-MS2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Premier Mounts PCM-MS2.
However, one of the most important roles played by the user manual is to help in solving problems with Premier Mounts PCM-MS2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Premier Mounts PCM-MS2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
