Instruction/ maintenance manual of the product FLIP-B Premier Mounts
Go to page of 11
INST ALLA TION INSTRUCTIONS FLIP Flip-Down LCD Mount NOR TH AMERICA 3130 East Miraloma A venue Anaheim, CA 92806 USA USA and Canada – Phone: 800-368-9700 Fax: 800-832-4888 EUROPE Swallow House, Shil.
Page 2 Installation Instructions T able of Contents PREMIER MOUNTS DOES NOT W ARRANT AGAINST DAMAGE CAUSED BY THE USE OF ANY PREMIER MOUNTS PRODUCT FOR PURPOSES OTHER THAN THOSE FOR WHICH IT W AS DESI.
Installation Instructions Page 3 Parts List M5 x 10mm Flat Head Screw (Qty 1) Flip Mount (Qty 1) M4 x 10mm Combo Screw (Qty 4) 1/4-20 x 5/8” Combo Screw (Qty 2) 1/4-20 T ee Nut (Qty 2) #14 x 2” W .
Page 4 Installation Instructions FLIP Mount Before drilling, make sure that there is enough room to lower and raise the display . For example, when the display is put in the “up” position, it should not hit the wall and should be even with the front of the cabinet.
Installation Instructions Page 5 Hardwood Cabinet Installations Step 1 . Place the FLIP Mount base on the mounting location and mark (using a pencil) where the FLIP will be mounted. FLIP Mount This distance was determined in the FLIP Mount Location section.
Page 6 Installation Instructions FLIP Mount Step 3 . Line the FLIP Mount up with the two pre-drilled mounting holes and use two (2) #14 x 7/8” wood screws and secure the FLIP Mount to the underside of the cabinet using a screwdriver .
Installation Instructions Page 7 FLIP Mount Step 5 . Using a portable drill, insert and tighten two (2) #14 x 2” wood screws. Do NOT over -tighten the wood screws, as this could cause the threads to strip out the wood inside the wall stud. 1/8” Drill Bit Step 4 .
Page 8 Installation Instructions FLIP Mount Attaching the Flat Panel Step 1 . Locate the mounting points that are on the back of the fl at panel. Step 2 . Line up the mounting points on the fl at panel with the corresponding mounting holes on the FLIP mount.
Installation Instructions Page 9 FLIP Mount FLIP Mount Adjustments V ertical Adjustment Left-to-Right 360° Rotation Adjustment 360° Rotation Adjustment Final Adjustments The FLIP mount has pivots points that allow the mount to be easily adjusted. Once the adjustments have been made, the pivot points will need to be tightened.
Page 10 Installation Instructions T echnical Speci fi cation All measurements are in inches [mm]. FLIP Mount.
Installation Instructions Page 1 1 W arranty PREMIER MOUNTS LIMITED LIFETIME W ARRANTY What and Who is Cover ed by this Limited W arranty and for How Long Premier Mounts warrants this product to be free from defects in material and workmanship for the lifetime of the original owner of this product.
An important point after buying a device Premier Mounts FLIP-B (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Premier Mounts FLIP-B yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Premier Mounts FLIP-B - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Premier Mounts FLIP-B you will learn all the available features of the product, as well as information on its operation. The information that you get Premier Mounts FLIP-B will certainly help you make a decision on the purchase.
If you already are a holder of Premier Mounts FLIP-B, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Premier Mounts FLIP-B.
However, one of the most important roles played by the user manual is to help in solving problems with Premier Mounts FLIP-B. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Premier Mounts FLIP-B along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
