Instruction/ maintenance manual of the product TH150 Series Aube Technologies
Go to page of 6
TH150 400-150-000-C 5/9/06 1/6 1. Introduction The TH150 Series electronic th ermostat is designed for low-voltage pressure-dependent variable air volume (V A V) applications.
TH150 400-150-000-C 5/9/06 2/6 3. T ypical Applications FIGURE 1 : Damper control with electric reheat and auxil iary baseboard heating. FIGURE 3 : Damper control with auto matic changeo ver , elec- t.
TH150 400-150-000-C 5/9/06 3/6 4. Configuration 4.1 Configuration Menus 1A model Application (section 4.2) Default mode & Output 1 type (section 4.3.1) NSB value (section 5.6) Output 1 min. opening (section 4.3.2) Maximum setpoint (section 4.6) Minimum setpoint (section 4.
TH150 400-150-000-C 5/9/06 4/6 4.2 Application T ypes The following table shows the different thermostat applications and their corresponding settin gs in the configuration menu. 4.3 Output 1 Output 1 is used to control a dam per . It controls heating when the thermostat is in heat mode or cool ing when the thermostat is in cool mode.
TH150 400-150-000-C 5/9/06 5/6 4.5 Output 3 (models TH150-1A2T a nd TH150-1F2T) The following table shows the output types for Output 3 and their corresponding settings in the config uration menu. When any setting between 1 and 4 is sel ected, Output 3 controls heating only , regardle ss of the thermostat’s mode.
TH150 400-150-000-C 5/9/06 6/6 5.5 Mode Changeover The thermostat can switch betwe en heat mode a nd cool mode either via: • the automa tic changeover • the changeover input 5.
An important point after buying a device Aube Technologies TH150 Series (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Aube Technologies TH150 Series yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Aube Technologies TH150 Series - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Aube Technologies TH150 Series you will learn all the available features of the product, as well as information on its operation. The information that you get Aube Technologies TH150 Series will certainly help you make a decision on the purchase.
If you already are a holder of Aube Technologies TH150 Series, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Aube Technologies TH150 Series.
However, one of the most important roles played by the user manual is to help in solving problems with Aube Technologies TH150 Series. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Aube Technologies TH150 Series along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
