Instruction/ maintenance manual of the product 69390 Attwood
Go to page of 2
T sunami Bilge Pump 4606, 4608, 4612, 4613 Series Installation Instructions SAVE THESE INSTRUCTIONS Form Number 69390 Rev. A 10-03 3 ® WARNING Read all instructions carefully before installing and using this product. To prevent personal injury, disconnect the power source when installing or servicing this product.
©2003 Attwood Corporation 1016 N. Monroe Street, Lowell, MI 49331-0260 www.attwoodmarine.com 1. Connect positive lead (brown) to switch. For automatic operation, use Attwood Automatic Float Switch (#4201 or 4202). Connect negative lead (black) to ground.
An important point after buying a device Attwood 69390 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Attwood 69390 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Attwood 69390 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Attwood 69390 you will learn all the available features of the product, as well as information on its operation. The information that you get Attwood 69390 will certainly help you make a decision on the purchase.
If you already are a holder of Attwood 69390, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Attwood 69390.
However, one of the most important roles played by the user manual is to help in solving problems with Attwood 69390. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Attwood 69390 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
