Instruction/ maintenance manual of the product 6375D Attwood
Go to page of 2
Figure 1 3. Attach power wires to suitable switch, 1 -amp fuse, and power source. 4. Apply marine sealant around base and wire hole. Use #8 screws to fasten light to deck. MAINTENANCE Replace bulb with #90, 7.5 watt type (Attwood #9232): 1. Remove light from deck.
3 ® MATÉRIAU REQUIS POUR L’INSTALLATION • Perceuse avec foret de 3 mm (1/8 po) et de 6 mm (1/4 po) de diam è tre. • Tournevis et deux vis inoxydables #8 x 3/4 po (19 mm). • Produit d ’é tanch é it é marin convenable. • Fil à 2 conducteurs, de calibre 14, pour la connexion de l ’ interrupteur à la source de courant.
An important point after buying a device Attwood 6375D (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Attwood 6375D yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Attwood 6375D - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Attwood 6375D you will learn all the available features of the product, as well as information on its operation. The information that you get Attwood 6375D will certainly help you make a decision on the purchase.
If you already are a holder of Attwood 6375D, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Attwood 6375D.
However, one of the most important roles played by the user manual is to help in solving problems with Attwood 6375D. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Attwood 6375D along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
