Instruction/ maintenance manual of the product 6320 Series Attwood
Go to page of 2
REQUIRED FOR INST ALLA TION • Phillips screwdriver and flat head screwdriver • Drill and bits: 3/8 ″ for wire clearance hole • Pilot drill for mounting screws • T wo #4 stainless steel screws for 6342 and 6347 lights. T wo #6 stainless steel screws for 6320-6324, 6340, 6341, 6345, 6346, 6348, and 6349 lights.
FÜR DIE INST ALLA TION SIND NOTWENDIG: • Kreuzschlitz-Schraubendreher und Schraubendreher für Senkkopfschrauben • Bohrer und Bohraufsätze: Bohrer für 10 mm Drahtdurchführungloch • Bohrer für Führungslöcher der Montageschrauben • Zwei Senkkopfschrauben Nr .
An important point after buying a device Attwood 6320 Series (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Attwood 6320 Series yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Attwood 6320 Series - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Attwood 6320 Series you will learn all the available features of the product, as well as information on its operation. The information that you get Attwood 6320 Series will certainly help you make a decision on the purchase.
If you already are a holder of Attwood 6320 Series, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Attwood 6320 Series.
However, one of the most important roles played by the user manual is to help in solving problems with Attwood 6320 Series. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Attwood 6320 Series along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center